Jeep Truck 46/8400
Built: 1978 · Series: Other models
More machines from model year 1978
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Jeep – other models: pickups and trucks from the US brand, from the Kaiser M715 through the J4000 to the Gladiator and Grand Wagoneer, six- and eight-cylinder engines from 3.0 to 6.4 litres, 99 to 346 kW
This page collects Jeep commercial vehicles spanning several decades: the Kaiser M715, a military truck built by Kaiser Jeep in the 1960s on the Gladiator pickup platform, the civilian J-series with the J4000 as a heavier pickup variant, plus today's Gladiator, including Overland trim, and the Grand Wagoneer, revived in 2022 as a large SUV on a pickup-related platform. The C127 and Truck 46/8400 designations refer to the brand's early post-war commercial vehicles.
Read on 3 more paragraphs
The register lists 10 variants here with outputs from 98.8 to 346 kW from six- and eight-cylinder engines displacing 2,987 to 6,400 cm³. Lengths range from 5,330 to 5,900 mm, widths from 1,894 to 2,480 mm.
While the Kaiser M715 is sought mainly by collectors and off-road builders as a rugged classic, the Gladiator and Grand Wagoneer target buyers who want off-road ability combined with everyday usability as a pickup or large SUV respectively. Both families also retain a strong following among restorers and off-road builders today.
When buying used, the M715 needs checks on the chassis frame and axles plus parts availability through military-vehicle specialists; the Gladiator needs the soft or hard top and four-wheel-drive components checked; the Grand Wagoneer needs the electronics and air suspension checked. Current parts run through the Jeep dealer network.
Sources: SpecCodex register, model data: Jeep (weitere Modelle), Jeep (Stellantis, Hersteller)
Technical data
Engine
| Power | 130 kWcorrect |
|---|---|
| Cylinders | 8correct |
| Displacement | 5,900 cm³correct |
Dimensions and weights
| Length | 5,900 mmcorrect |
|---|---|
| Width | 1,930 mmcorrect |
| Unladen weight | 2,201 kgcorrect |
Where this model stands
Power-to-weight ratio: 59.1 kW/t (130 kW / 2.2 t)
Stronger than 14% of the trucks in the register — out of 25,242 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Jeep Truck 46/8400 have?
The Jeep Truck 46/8400 delivers 130 kW.
How much does the Jeep Truck 46/8400 weigh?
The unladen weight is 2,201 kg.
What engine does the Jeep Truck 46/8400 have?
8 cylinders, 5,900 cm³ displacement.
What are the dimensions of the Jeep Truck 46/8400?
5,900 mm × 1,930 mm.
When was the Jeep Truck 46/8400 built?
Production years: 1978.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.
