Deutz-Fahr 5110 – specifications
Built: 2016 · Series: Other models
Data for the version built 2016 · Data origin: Official register, Reference work (Wikipedia/Wikibooks) · sources
More machines from model year 2016
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Deutz-Fahr 5110 is a tractor from the 5110 series, introduced in 2016. As a representative of the tractor category, this model targets users requiring a machine with specific performance data for agricultural or municipal applications. The design follows the typical characteristics of this vehicle class, providing a solid foundation for various outdoor work tasks.
The tractor is powered by a four-cylinder engine with a displacement of 3,621 cm³, delivering an output of 77 kW. The maximum torque of 440 Nm ensures that the machine develops sufficient traction even with heavier attachments or in demanding terrain. With an unladen weight of 5,250 kg and a gross vehicle weight rating of 7,500 kg, the tractor is dimensioned to exhibit stable driving characteristics and accommodate additional loads. The dimensions of 5,085 mm in length and 2,550 mm in width allow for good visibility during operation. The transmission with 10 forward and 10 reverse gears permits flexible adjustment of speed to suit the respective soil cultivation or transport task. The fuel tank capacity of 165 l ensures longer operating durations without frequent refueling stops. The Category II/III linkage is designed to accommodate standard attachments.
Within the 5110 series, this model is positioned as a specific variant with the stated technical values. The combination of power, weight, and gear ratios defines the application range of this tractor group. Such machines are typically suitable for tasks such as soil cultivation, transport duties, and operation with various attachments compatible with linkage category II/III.
Deutz-Fahr – other models: the collective page of tractors outside the named ranges, from the MK3-generation classics through the 4 and 5 series to models with KEYLINE and TTV specification
This page gathers the Deutz-Fahr tractors the register could not assign to a named range – from older model years such as the 100 to 260 MK3 range through the four-cylinder 4 series (4.5, 4.56, 4.85, 4006) to the broad mid-range 5 series with types from 5060 to 5120. Deutz, founded in 1864 by Nikolaus Otto in Cologne as an engine works, merged its tractor business with that of the Fahr machinery works of Gottmadingen in 1968 to form Deutz-Fahr; since 1995 the brand has belonged to the Italian SAME-Deutz-Fahr group (SDF), which builds the tractors in Lauingen on the Danube in Bavaria. In the 5 series the type designation clearly tracks the power: the 5090 has about 90 hp, the 5105 about 105 hp, the 5115 about 115 hp; the suffixes KEYLINE, ECOLINE and TTV denote the equipment level and stepless transmission, D and DT four-wheel drive.
Read on 3 more paragraphs
The register lists here 213 versions with 35 to 211.1 kW (47 to 268 hp) from three- to six-cylinders of 1,758 to 7,146 cm³, unladen weights from 2,800 to 10,725 kg, gross weights from 4,500 to 16,000 kg, lengths from 2,980 to 5,820 mm, widths from 2,008 to 2,944 mm and heights from 2,020 to 3,225 mm.
Deutz-Fahr is one of Europe's longest-established tractor brands and a fixture in the mid and upper power segment in Germany, Italy and much of southern Europe; the brand's distinctive green paint and cab design have shaped its image for decades.
On used tractors, engine condition and rust on the bodywork count on the older MK3 and 4-series models, on the 5 series the transmission (mechanical, KEYLINE or stepless TTV), hydraulics and electronics, and on the DF and G variants the condition of the four-wheel-drive clutch; parts run through the SDF network and in part through Same and Lamborghini workshops.
Sources: SpecCodex register, model data: Deutz-Fahr (weitere Modelle), Deutz-Fahr (SDF, Hersteller)
Technical data
Engine
| Power | 77 kWcorrect |
|---|---|
| Torque | 440 Nmcorrect |
| Cylinders | 4correct |
| Displacement | 3,621 cm³correct |
Dimensions and weights
| Length | 5,085 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Unladen weight | 5,250 kgcorrect |
| Gross vehicle weight | 7,500 kgcorrect |
Drivetrain and chassis
| Gearbox | 10V / 10Rcorrect |
|---|
Working data
| Fuel tank capacity | 165 lcorrect |
|---|
Other data
| Linkage category | Cat II/IIIcorrect |
|---|
Where this model stands
Power-to-weight ratio: 14.7 kW/t (77 kW / 5.2 t)
Power class: Large (100–180 hp)
Stronger than 69% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Deutz-Fahr 5110 have?
The Deutz-Fahr 5110 delivers 77 kW.
How much does the Deutz-Fahr 5110 weigh?
The unladen weight is 5,250 kg.
What is the gross vehicle weight of the Deutz-Fahr 5110?
7,500 kg.
What engine does the Deutz-Fahr 5110 have?
4 cylinders, 3,621 cm³ displacement.
What are the dimensions of the Deutz-Fahr 5110?
5,085 mm × 2,550 mm.
When was the Deutz-Fahr 5110 built?
Production years: 2016.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 13 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Traficom — Finnish vehicle register (retrieved August 2026) · Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved September 2026) · Values adopted and presented in our own form; changes from the source are possible. · Data sources and cross-checks
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
