StartTractorsAllis Chalmers › 8010

Allis Chalmers 8010

Built: 1981-1985 · Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Allis Chalmers 8010 is a tractor built in 1981-1985. The engine is rated at 80 kW.

It runs on diesel; the engine is water-cooled. This model followed the Allis-Chalmers 7010, before the Deutz-Allis 8010 took over. Within the range, rated power spans from 2 to 863 kW; with 80 kW, the 8010 sits in the upper third. Directly alongside are the 7000 with 79 kW below and the HD-19 with 83 kW above.

Technical data

Engine

Engine makeAllis-Chalmerscorrect
Fueldieselcorrect
Power107 hp (80 kW)correct
Coolingwater-cooledcorrect

Drivetrain and chassis

Driverear-wheel driveWD/MFWDcorrect

Origin and approval

PlantUSAcorrect
PredecessorAllis-Chalmers 7010correct
SuccessorDeutz-Allis 8010correct

Frequently asked questions

How much power does the Allis Chalmers 8010 have?

The Allis Chalmers 8010 delivers 107 hp.

When was the Allis Chalmers 8010 built?

Production years: 1981-1985.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 11 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare