Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Allis Chalmers › D-10

Allis Chalmers D-10

Built: 1959–1968 · Series: D-Baureihe

More machines from model year 1959

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Allis Chalmers D-10 is a model in the D series. Production: 1959–1968. The engine delivers 26 hp (19.1 kW), has 4 cylinders, with a displacement of 2,273 cm³. The engine comes from Allis-Chalmers. Rated speed is 1,650 rpm. The machine is 3,061 mm long, 1,575 mm wide and 1,930 mm high. The unladen weight is 1,297 kg. The wheelbase measures 2,000 mm. Ground clearance is 533 mm. Top speed is 20 km/h. The tank holds 54.6 litres. Transmission: 4 V/1 R. The engine is water-cooled. Tyres: front 4.00-15, rear 10-24. The model was built in USA. The fuel is petrol. The bore measures 85.73 mm. The stroke is 98.43 mm. The compression ratio is 7.75:1. Construction: frame construction. It was succeeded by the Allis-Chalmers D10 Series II. Around 5.308 units were built. The D-Baureihe series covers 7 models. Rated output within it ranges from 23.9 to 117 hp; the D-10 sits at the bottom of that range with 26 hp. Its immediate neighbours are the D-12 below it with 23.9 hp and the D-14 above it with 34.6 hp. Unladen weight within it ranges from 1,297 to 4,874 kg; here the D-10 sits at the bottom of that range with 1,297 kg. 220 Allis Chalmers models across 18 series are on record.

Allis-Chalmers D series (1957–1969) – the orange tractors from Milwaukee and La Porte: D-10 to D-21, the number as size class, petrol, LPG and diesel, Power Director and Traction Booster

The D series was Allis-Chalmers' programme of the late 1950s and 1960s – the tractors that replaced the letter models WD and CA and with which the maker from Milwaukee, Wisconsin, loaded its West Allis works and the La Porte, Indiana, tractor plant. The type logic: D marks the range, the number orders the size in ascending order – D-10 and D-12 the small one- and two-row tractors, D-14 and D-15 the mid-range, D-17 the best seller at about 50 hp, D-19 of 1961 the first production tractor with a turbodiesel, D-21 of 1963 the first Allis-Chalmers over 100 hp with the six-cylinder of 7.0 litres. The fuels were a matter of choice: petrol, LPG and diesel, as the register entries show; the transmissions carried the Power Director, a two-speed powershift with hand lever, and the hydraulics the Traction Booster, which transfers weight from the implement to the rear wheels.

Read on 3 more paragraphs

The register lists 7 versions with 17.6 to 86.1 kW from four- and six-cylinders of 2,273 to 6,974 cm³ at 1,650 to 2,200 rpm, unladen weights from 1,297 to 4,874 kg, lengths from 3,061 to 4,079 mm, widths from 1,575 to 2,327 mm and heights from 1,419 to 2,708 mm.

The D series is the most-collected Allis-Chalmers generation; the D-17 was built in over 60,000 units, and the range passed into the 100s (170, 180, 190) in 1964.

On used tractors, originality, engine condition and carburettor or injection, Power Director (clutch pack), gearbox, Traction Booster hydraulics and sheet metal count; parts run through collector dealers in North America.

Sources: SpecCodex register, model data: Allis-Chalmers D-Baureihe, Allis-Chalmers (Wikipedia)

Technical data

Engine

Engine makeAllis-Chalmerscorrect
Fuelpetrolcorrect
Power26 hp (19.1 kW)correct
Rated speed1,650 rpmcorrect
Cylinders4correct
Displacement2,273 cm³correct
Bore85.73 mmcorrect
Stroke98.43 mmcorrect
Compression ratio7.75correct
Coolingwater-cooledcorrect

Dimensions and weights

Length3,061 mmcorrect
Width1,575 mmcorrect
Height1,930 mmcorrect
Wheelbase2,000 mmcorrect
Ground clearance533 mmcorrect
Unladen weight1,297 kgcorrect

Drivetrain and chassis

Driverear-wheel drivecorrect
Gearbox4 V/1 Rcorrect
Front tyres4.00-15correct
Rear tyres10-24correct
Top speed20 km/hcorrect

Working data

Fuel tank capacity54.6 lcorrect

Origin and approval

PlantUSAcorrect
Constructionframe constructioncorrect
Units built5,308correct

Other data

SuccessorAllis-Chalmers D10 Series IIcorrect

Where this model stands

Power-to-weight ratio: 14.7 kW/t (19 kW / 1.3 t)

Power class: Compact (< 40 hp)

Stronger than 14% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Allis Chalmers D-10 have?

The Allis Chalmers D-10 delivers 26 hp.

How much does the Allis Chalmers D-10 weigh?

The unladen weight is 1,297 kg.

What engine does the Allis Chalmers D-10 have?

4 cylinders, 2,273 cm³ displacement, Benzin.

How fast does the Allis Chalmers D-10 go?

Top speed is 20 km/h.

What are the dimensions of the Allis Chalmers D-10?

3,061 mm × 1,575 mm × 1,930 mm.

When was the Allis Chalmers D-10 built?

Production years: 1959–1968.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 30 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare