Ursus C-4011 / C-355 / C-360 / C-362
1965-1994 · 6 models in this series
Ursus C-355 to C-4011 (Poland) – Zetor-licensed tractors built in Ursus, Warsaw: C-355, C-360, C-362, three- and four-cylinder diesels rated 33–42 kW, 2,000–2,170 kg
The C-355 to C-4011 line brings together the standard tractors built by Ursus in Warsaw under the Polish-Czechoslovak cooperation agreement as licensed Zetor designs. Ursus, a Polish tractor maker operating since the 1920s in the Warsaw district of the same name, took the mid-range Zetor concept for the C-355 and C-360 and adapted it for its own production; the C-362 and C-4011 carried the line forward with detail changes, while the C-355M and C-360-3P denote further developed versions. The family is powered by three- and four-cylinder diesel engines, with one version's engine recorded as the S-4002; drive is two-wheel throughout.
Read on 3 more paragraphs
The register lists 6 versions rated at 33 to 42 kW (45 to 56 hp) from three- and four-cylinder engines of 2,502 to 3,121 cm³, torque of 165 to 190 Nm at 2,200 to 2,250 rpm, kerb weights of 2,000 to 2,170 kg, and a length of 3,250 to 3,610 mm, a width of 1,800 mm and a height of 2,050 mm.
The C-series was the bread-and-butter tractor of Polish agriculture and of farms across the Eastern Bloc; through state foreign trade, Ursus tractors of this class also reached Western Europe, where they were sold as a low-cost alternative to Western makes. The close kinship with Zetor technology secured a broad parts base across both manufacturers.
On a used example, check the condition of the engine and injection pump, clutch and gearbox, the hydraulics including the lift, and corrosion on the wings, cab and frame; the simple mechanicals make repairs easier, and spares run through the Zetor-compatible dealer network across Central and Eastern Europe. A test drive checking steering, brakes and the PTO clutch is worthwhile before buying.
Sources: SpecCodex register, model data: Ursus C-355 / C-360 / C-362 / C-4011
Models compared
6 of 6 models.
| C-3551971-1975 | C-355M1975-1976 | C-3601976-1994 | C-360-3P1981-1993 (export until 1998) | C-3621976-1987 | C-40111965-1970 | |
|---|---|---|---|---|---|---|
| Power | 34 kW | 33 kW | 39 kW | 34.9 kW | 42 kW | 34 kW |
| Rated speed | – | – | 2,200 rpm | 2,250 rpm | – | – |
| Linkage category | – | – | Cat II | Cat II | – | – |
| Cylinders | 4 | – | 4 | 3 | 4 | 4 |
| Displacement | 3,121 cm³ | – | 3,121 cm³ | 2,502 cm³ | 3,121 cm³ | 3,120 cm³ |
| Torque | – | – | 190 Nm | 165 Nm | – | – |
| Fuel tank capacity | – | – | 70 l | 68 l | – | – |
| Forward gears | – | – | 10 | 10 | – | – |
| Reverse gears | – | – | 2 | 2 | – | – |
| Top speed | – | – | 25.4 km/h | 25 km/h | 25.4 km/h | – |
| Wheelbase | 2,130 mm | – | 2,125 mm | 2,172 mm | – | 2,130 mm |
| Length | 3,560 mm | – | 3,571 mm | 3,610 mm | – | 3,250 mm |
| Width | – | – | 1,800 mm | 1,800 mm | – | – |
| Height | – | – | 2,050 mm | 2,050 mm | – | – |
| Unladen weight | 2,000 kg | – | 2,170 kg | 2,056 kg | 2,020 kg | – |
Models
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
C-355
The Ursus C-355 is a model in the C-4011 / C-355 / C-360 / C-362 series. Production: 1971-1975. The engine delivers...
C-355M
The Ursus C-355M is a tractor from the C-4011 / C-355 / C-360 / C-362 series, built in 1975-1976. 45 hp (33 kW) is...
C-360
The C-360 from Ursus is part of the C-4011 / C-355 / C-360 / C-362 series. Production: 1976-1994. The engine...
C-360-3P Perkins engine
The C-4011 / C-355 / C-360 / C-362 series from Ursus includes the C-360-3P Perkins-Motor. Production: 1981-1993...
C-362
The Ursus C-362 belongs to the C-4011 / C-355 / C-360 / C-362 series. Production: 1976-1987. The engine delivers 52...
C-4011
The Ursus C-4011 belongs to the C-4011 / C-355 / C-360 / C-362 series. Production: 1965-1970. The engine delivers 42...
