Ursus C-360-3P Perkins engine
Built: 1981-1993 (export until 1998) · Series: C-4011 / C-355 / C-360 / C-362
More machines from model year 1981
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Ursus C-355 to C-4011 (Poland) – Zetor-licensed tractors built in Ursus, Warsaw: C-355, C-360, C-362, three- and four-cylinder diesels rated 33–42 kW, 2,000–2,170 kg
The C-355 to C-4011 line brings together the standard tractors built by Ursus in Warsaw under the Polish-Czechoslovak cooperation agreement as licensed Zetor designs. Ursus, a Polish tractor maker operating since the 1920s in the Warsaw district of the same name, took the mid-range Zetor concept for the C-355 and C-360 and adapted it for its own production; the C-362 and C-4011 carried the line forward with detail changes, while the C-355M and C-360-3P denote further developed versions. The family is powered by three- and four-cylinder diesel engines, with one version's engine recorded as the S-4002; drive is two-wheel throughout.
Read on 3 more paragraphs
The register lists 6 versions rated at 33 to 42 kW (45 to 56 hp) from three- and four-cylinder engines of 2,502 to 3,121 cm³, torque of 165 to 190 Nm at 2,200 to 2,250 rpm, kerb weights of 2,000 to 2,170 kg, and a length of 3,250 to 3,610 mm, a width of 1,800 mm and a height of 2,050 mm.
The C-series was the bread-and-butter tractor of Polish agriculture and of farms across the Eastern Bloc; through state foreign trade, Ursus tractors of this class also reached Western Europe, where they were sold as a low-cost alternative to Western makes. The close kinship with Zetor technology secured a broad parts base across both manufacturers.
On a used example, check the condition of the engine and injection pump, clutch and gearbox, the hydraulics including the lift, and corrosion on the wings, cab and frame; the simple mechanicals make repairs easier, and spares run through the Zetor-compatible dealer network across Central and Eastern Europe. A test drive checking steering, brakes and the PTO clutch is worthwhile before buying.
Sources: SpecCodex register, model data: Ursus C-355 / C-360 / C-362 / C-4011
Technical data
Engine
| Engine | Perkins AD3.152UR, 3 cyl. turbodoładowany, wtrysk bezpośrednicorrect |
|---|---|
| Power | 47.5 hp (34.9 kW)correct |
| Rated speed | 2,250 rpmcorrect |
| Torque | 165 Nmcorrect |
| Cylinders | 3correct |
| Displacement | 2,502 cm³correct |
Dimensions and weights
| Length | 3,610 mmcorrect |
|---|---|
| Width | 1,800 mmcorrect |
| Height | 2,050 mmcorrect |
| Wheelbase | 2,172 mmcorrect |
| Unladen weight | 2,056 kgcorrect |
Drivetrain and chassis
| Gearbox | 10+2correct |
|---|---|
| Forward gears | 10correct |
| Reverse gears | 2correct |
| Top speed | 25 km/hcorrect |
Working data
| Fuel tank capacity | 68 lcorrect |
|---|
Other data
| Linkage category | Cat IIcorrect |
|---|
Where this model stands
Power-to-weight ratio: 17 kW/t (35 kW / 2.1 t)
Power class: Universal (40–100 hp)
Stronger than 31% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Ursus C-360-3P have?
The Ursus C-360-3P delivers 47.5 hp.
How much does the Ursus C-360-3P weigh?
The unladen weight is 2,056 kg.
What engine does the Ursus C-360-3P have?
3 cylinders, 2,502 cm³ displacement.
How fast does the Ursus C-360-3P go?
Top speed is 25 km/h.
What are the dimensions of the Ursus C-360-3P?
3,610 mm × 1,800 mm × 2,050 mm.
When was the Ursus C-360-3P built?
Production years: 1981-1993 (eksport do 1998).
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 19 individual figures for this model. They come from 3 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Wikipedia (CC BY-SA 4.0) (retrieved August 2026) · Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved September 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
