Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › Ravens › Other models

Ravens Other models

2 models in this series

Ravens – other models: the collective page of semi-trailers and bodies outside the named ranges, Drag & Go and Tag & Go, 43,000 kg gross weight, 6,000 to 6,960 kg unladen weight

This page gathers the Ravens units the register could not assign to a named range – it lists two designations for heavy semi-trailers and bodies side by side, Drag & Go and Tag & Go. Ravens builds semi-trailer chassis and bodies for the heavy-transport segment; both types on this page belong to that segment of large, low-built trailers for construction and haulage operators.

Read on 3 more paragraphs

The register lists here 2 versions with unladen weights from 6,000 to 6,960 kg, a gross weight of 43,000 kg, lengths from 12,540 to 13,210 mm and a width of 2,540 mm.

At a gross weight of 43 tonnes, both versions sit well above the threshold of trailer category O4, which starts above 10,000 kg; this is the range occupied by semi-trailers for heavy and construction haulage, where a payload of around 36 to 37 tonnes makes up most of the gross weight. Such trailers usually run in the commercial fleets of construction, earthmoving or heavy-haulage operators.

On a used semi-trailer of this size, the condition of frame and axles, the function and wear of the brake system, the state of the kingpin bearing and air suspension, and the tightness and structure of the body all matter; corrosion of load-bearing parts and worn axle bearings are common weak points on intensively used heavy trailers. Parts for axles, brakes and air suspension usually run through specialist commercial-vehicle and trailer workshops.

Sources: SpecCodex register, model data: Ravens (weitere Modelle)

Models

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare