Ravens TAG & GO
Built: 2008 · Series: Other models
More machines from model year 2008
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Ravens – other models: the collective page of semi-trailers and bodies outside the named ranges, Drag & Go and Tag & Go, 43,000 kg gross weight, 6,000 to 6,960 kg unladen weight
This page gathers the Ravens units the register could not assign to a named range – it lists two designations for heavy semi-trailers and bodies side by side, Drag & Go and Tag & Go. Ravens builds semi-trailer chassis and bodies for the heavy-transport segment; both types on this page belong to that segment of large, low-built trailers for construction and haulage operators.
Read on 3 more paragraphs
The register lists here 2 versions with unladen weights from 6,000 to 6,960 kg, a gross weight of 43,000 kg, lengths from 12,540 to 13,210 mm and a width of 2,540 mm.
At a gross weight of 43 tonnes, both versions sit well above the threshold of trailer category O4, which starts above 10,000 kg; this is the range occupied by semi-trailers for heavy and construction haulage, where a payload of around 36 to 37 tonnes makes up most of the gross weight. Such trailers usually run in the commercial fleets of construction, earthmoving or heavy-haulage operators.
On a used semi-trailer of this size, the condition of frame and axles, the function and wear of the brake system, the state of the kingpin bearing and air suspension, and the tightness and structure of the body all matter; corrosion of load-bearing parts and worn axle bearings are common weak points on intensively used heavy trailers. Parts for axles, brakes and air suspension usually run through specialist commercial-vehicle and trailer workshops.
Sources: SpecCodex register, model data: Ravens (weitere Modelle)
Technical data
Dimensions and weights
| Length | 13,210 mmcorrect |
|---|---|
| Width | 2,540 mmcorrect |
| Wheelbase | 8,900 mmcorrect |
| Unladen weight | 6,000 kgcorrect |
| Gross vehicle weight | 43,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Ravens TAG & GO weigh?
The unladen weight is 6,000 kg.
What is the gross vehicle weight of the Ravens TAG & GO?
43,000 kg.
Up to what speed is the Ravens TAG & GO approved?
Approved up to 100 km/h.
What are the dimensions of the Ravens TAG & GO?
13,210 mm × 2,540 mm.
When was the Ravens TAG & GO built?
Production years: 2008.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
