Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Landini › Alpine

Landini Alpine

9 models in this series

The Alpine series from Landini comprises 9 models.

Landini Alpine 65 to 85 – the low hillside tractor from Fabbrico: the number as hp class, STD and GT as equipment lines, Perkins 804C-33T of 3.3 litres with turbocharger, 51 to 61 kW, 62 to 74 hp at the PTO

Landini 70
Pictured: Landini 70

The Alpine is Landini's tractor for the mountains: a compact, low four-wheel tractor with low centre of gravity, short wheelbase and equal or nearly equal wheels, built for sloping meadows, alpine farming and orchards in South Tyrol, Switzerland and Austria, where standard tractors are too tall and too wide. Landini of Fabbrico near Reggio Emilia, since 1994 the core of the ARGO group, ran the range in the 2000s; the type logic: the number gives the hp class – Alpine 65 about 65 hp, 75 about 75, 85 about 85 – STD the standard equipment, GT the higher equipment line with more comfort and hydraulics. The engine in all models is the Perkins 804C-33T, a four-cylinder turbodiesel of 3.3 litres at 2,500 rpm, rated in steps to the three power classes.

Read on 3 more paragraphs

The register lists 9 versions with 51.1 to 60.8 kW from the four-cylinder of 3,319 cm³, PTO outputs from 62 to 74 hp, unladen weights from 2,794 to 3,050 kg, lengths from 3,990 to 4,020 mm, a width of 1,820 mm and a height of 2,413 mm.

The Alpine competes with the mountain tractors of Lindner, Reform and Aebi and with the Landini Rex in orchards; its argument is the standard layout – a normal tractor, only low – against the more expensive special designs.

On used tractors, operating hours, Perkins engine and turbocharger, shuttle and four-wheel-drive clutch, brakes (decisive on slopes), hydraulic tightness and parts supply through ARGO and Perkins are what count.

Sources: SpecCodex register, model data: Landini Alpine, Landini (ARGO Tractors, Hersteller)

Models compared

9 of 9 models.

70 80 85 Alpine 65 GT Alpine 65 STD Alpine 75 GT Alpine 75 STD Alpine 85 GT Alpine 85 STD
Power 51.1 kW 56 kW 59.7 kW 51.5 kW 51.5 kW 56.7 kW 56.7 kW 60.8 kW 60.8 kW
Rated speed – – – 2,500 rpm 2,500 rpm 2,500 rpm 2,500 rpm 2,500 rpm 2,500 rpm
PTO output – – – 62 hp 62 hp 69 hp 69 hp 74 hp 74 hp
Cylinders 4 4 4 4 4 4 4 4 4
Displacement 3,319 cm³ 3,319 cm³ 3,319 cm³ 3,326.6 cm³ 3,326.6 cm³ 3,326.6 cm³ 3,326.6 cm³ 3,326.6 cm³ 3,326.6 cm³
Fuel tank capacity 90 l 90 l 90 l 90.8 l 90.8 l 90.8 l 90.8 l 90.8 l 90.8 l
Forward gears 15 15 15 – – – – – –
Reverse gears 15 15 15 – – – – – –
Top speed 40 km/h 40 km/h 40 km/h – – – – – –
Wheelbase 2,162 mm 2,162 mm 2,162 mm – – – – – –
Length 4,020 mm 4,020 mm 4,020 mm 3,990 mm 4,020 mm 3,990 mm 4,020 mm 3,990 mm 4,020 mm
Width 1,820 mm 1,820 mm 1,820 mm – – – – – –
Height 2,413 mm 2,413 mm 2,413 mm – – – – – –
Unladen weight 3,050 kg 3,050 kg 3,050 kg 2,794.1 kg 3,043.6 kg 2,794.1 kg 2,798.7 kg 2,794.1 kg 3,043.6 kg
Turning radius – – – 3,020 mm 3,020 mm 3,020 mm 3,020 mm 3,020 mm 3,020 mm

Models

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare