Landini Alpine 85 STD 4WD
Series: Alpine
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Landini Alpine 85 STD is a tractor from the Landini 4WD Tractor series. Power comes from a four-cylinder engine; from 3.3 litres it draws 83 hp (60.8 kW). Rated speed is 2,500 rpm.
Unladen, it tips the scales at 3,044 kg.
Within the range, rated power spans from 36 to 217 hp; with 82.6 hp, the Alpine 85 STD sits in the mid-field. Directly alongside are the Alpine 75 STD with 77.1 hp below and the Powerfarm 85 with 82.7 hp above.
Technical data
Engine
| Engine model | 804C-33Tcorrect |
|---|---|
| Power | 82.6 hp (60.8 kW)correct |
| Rated speed | 2,500 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 3,326.6 cm³correct |
| Aspiration | turbochargedcorrect |
Dimensions and weights
| Ground clearance | 397correct |
|---|---|
| Unladen weight | 3,043.6 kgcorrect |
Drivetrain and chassis
| Gearbox type | Speedfivecorrect |
|---|---|
| Forward gears | 30correct |
| Reverse gears | 30correct |
| Tyre size | Front 360/70R20, Rear 420/70R30correct |
Working data
| Pump flow | 83.3 l/mincorrect |
|---|---|
| Hydraulic pressure | 180correct |
| Fuel tank capacity | 90.8 lcorrect |
Other data
| Height | 2,414correct |
|---|
Where this model stands
Power-to-weight ratio: 20 kW/t (61 kW / 3 t)
Power class: Universal (40–100 hp)
Stronger than 58% of the tractors in the register — out of 15,240 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Landini Alpine 85 STD have?
The Landini Alpine 85 STD delivers 82.6 hp.
How much does the Landini Alpine 85 STD weigh?
The unladen weight is 3,044 kg.
What engine does the Landini Alpine 85 STD have?
4 cylinders, 3,327 cm³ displacement.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 17 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.