Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › International Harvester › A-Familie

International Harvester A-Familie

6 models in this series

The A-Familie series from International Harvester comprises 6 models. Rated output ranges from 35 to 52 hp.

International Harvester A Family - Europe's small IH series 433 to 633 (V/E) in the tradition of the Farmall small tractors, three-cylinder engines of 2.5 to 2.9 litres, 26 to 38 kW, 1.5 to 2.1 t

International Harvester V 433/II
Pictured: International Harvester V 433/II

The A family sits below International Harvester's large standard tractors in the model hierarchy - the successor to the small Farmall A, B and C tractors with which IH held the lower power segment for smallholdings and specialty crops from 1939 into the 1950s. The types listed here, 433, 533 and 633, carry the additional V/E designation for different equipment variants, some in a second version (533 V/E II) and as the special variant V 433/II. The type logic follows IH's scheme: the first digit rises with the power class, the following two with displacement.

Read on 3 more paragraphs

The register lists 6 versions with 25.6 to 38.1 kW from three-cylinder engines of 2,536 to 2,934 cm³, torque of 145 to 188 Nm at around 2,050 to 2,200 rpm, kerb weights of 1,545 to 2,115 kg, lengths of 2,950 to 3,390 mm, widths of 998 to 1,644 mm and heights of 1,229 to 2,280 mm; every model runs on diesel.

Tractors of this class were the workhorses of smaller farms and of viticulture, orchards and vegetable growing, where narrow track width and compact dimensions between rows mattered. Compared with the US Farmall models, the 433 to 633 are tailored to the tighter conditions of European farming.

On a used example of these small three-cylinder diesels, check compression and the injection pump, the clutch, front-axle bearings and kingpins on the narrow-track versions, brakes and the hydraulic pump; parts for engine and driveline are still available through IH specialists and independent farm-machinery dealers.

Sources: SpecCodex register, model data: International Harvester A-Familie

Models compared

6 of 6 models.

433January 1975–March 1990 433 V/E7/1973 (E: 12/1973)–2/1975 (E: 10/1974) 533 V/E7/1973–2/1975 533 V/E II9/1975–3/1887 633 V/E9/1975–10/1987 V 433/II12/1975–10/1987
Power 25.6 kW 26.4 kW 32.9 kW 32.9 kW 38.1 kW 25.6 kW
Rated speed 2,050 rpm 1,900 rpm 2,200 rpm 2,200 rpm 2,180 rpm 2,050 rpm
Cylinders 3 3 3 3 3 3
Displacement 2,539 cm³ 2,536 cm³ 2,536 cm³ 2,536 cm³ 2,934 cm³ 2,536 cm³
Torque – 145 Nm 161 Nm 161 Nm 188 Nm 145 Nm
Top speed 27 km/h 20 km/h 20 km/h – 25 km/h 25 km/h
Wheelbase 2,070 mm 1,920 mm 1,920 mm 1,920 mm 1,920 mm 1,920 mm
Length 3,390 mm 2,950 mm 2,976 mm 3,285 mm 3,285 mm 3,285 mm
Width 1,644 mm 998 mm 1,145 mm 1,168 mm 1,168 mm 1,016 mm
Height 2,280 mm 1,925 mm 1,229 mm 1,350 mm 1,350 mm 1,327 mm
Unladen weight 2,115 kg 1,545 kg 1,545 kg 1,800 kg 1,810 kg 1,800 kg

Models

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare