Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Holder › E-Reihe

Holder E-Reihe

9 models in this series

The E-Reihe series from Holder comprises 9 models. Rated output ranges from 2.5 to 12 hp.

Holder E series – the single-axle tractors from Metzingen: E 3 to E 14, the number as hp class, B, F and D for petrol, bought-in engine and diesel, single-cylinder two-strokes and small diesels of 75 to 600 cm³

Holder E 3
Pictured: Holder E 3

Holder of Metzingen at the foot of the Swabian Alb has been at home in crop protection since 1888 and from the 1930s built single-axle tractors for vineyards, vegetable growing and smallholdings – the E series is that programme: E stands for the single-axle tractor (Einachser), the number orders the size by hp class in ascending order, from the E 3 with three hp to the E 14; the letters on the E 8 mark the engine, B for petrol, F for the bought-in engine (Fremdmotor) and D for the diesel, and E9D is the diesel version of the E 9. The engines are single-cylinders: two-stroke petrol engines running on 1:25 mixture in the small types, small diesels in the larger ones, with displacements of 75 to 600 cm³ and rated speeds up to 4,500 rpm – the two-strokes rev high, the diesels run slowly. The single-axle tractor carries a rotary tiller, plough, cutter bar, sprayer or trailer and is guided by handlebars; until the 1960s it was the vintner's and gardener's tractor before the articulated four-wheel tractors of the Holder A series replaced it.

Read on 3 more paragraphs

The register lists 9 versions with 1.9 to 9 kW from single-cylinders of 75 to 600 cm³; widths of the small types are 415 mm, heights between 730 and 1,030 mm.

Holder single-axle tractors are collectors' pieces today and in steep-slope viticulture partly still in use because they fit into rows no four-wheel tractor can enter.

On used machines, compression and ignition of the two-strokes, clutch and gearbox, the condition of handlebars and implements and parts supply, which for the engines runs through vintage specialists, are what count.

Sources: SpecCodex register, model data: Holder E-Reihe, Max Holder GmbH (manufacturer)

Models compared

9 of 9 models.

E 141970–1982 E 31956 to approx. 1969 E 41960–1971 E 51955–1959 E121960 E2001981–1992 E3101980–20XX E8 (E8B/E8F/E8D)1961–1970 E9/E9D1974–1990
Power 9 kW 1.9 kW – 3.8 kW 9 kW 4.4 kW 4.5 kW 5.88 kW 6.2 kW
Rated speed 2.600/3.000 rpm 4,500 rpm 3,500 rpm 3,500 rpm – – 3,600 rpm 3200/2650/2800 rpm 3600–4500 rpm
Cylinders 1 1 1 1 1 1 1 1 1
Displacement 550 cm³ 76 cm³ 75 cm³ 193 cm³ 600 cm³ – 216 cm³ 372 cm³ 202 cm³
Top speed 14 km/h 2 km/h – 20 km/h 14 km/h 11.65 km/h 3.1 km/h 15 km/h 20 km/h
Length 2,350 mm – – – 2,350 mm 1,630 mm 1,500 mm 2,060 mm 1,950 mm
Width 690 mm 1,500 mm – – 690 mm 650 mm 415 mm 574 mm 609 mm
Height 1,030 mm – – 820 mm 1,030 mm – 730 mm 1,024 mm 985 mm
Unladen weight 390 kg – – 105 kg 390 kg 75 kg 105 kg 244 kg 150 kg

Models

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare