Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › Goldhofer › STN-L

Goldhofer STN-L

6 models in this series

Goldhofer STN-L – semi-low-loaders from Memmingen: STN-L 3 and STN-L 4 range, 9.2 to 11.9 t unladen weight, gross weight up to 62 t, lengths up to over 20 m

Goldhofer of Memmingen in Bavaria is one of the world's leading makers of heavy-haulage and special-transport vehicles. This page covers the STN-L semi-low-loader range with the three-axle STN-L 3, STN-L 3 (225) A and STN-L 3-39/80 A F1 versions and the four-axle STN-L 4 (225) A, STN-L 4 (245) A and STN-L 4-33/80. As is usual with semi-trailers, the tractor unit alone provides the drive and part of the braking effort, while the trailer supplies the axles, brakes, tyres and load area.

Read on 3 more paragraphs

The register lists here 6 versions with unladen weights from 9,200 to 11,900 kg, gross weights from 38,680 to 62,000 kg, lengths from 12,490 to 20,460 mm and a width of 2,550 mm.

With gross weights up to 62 tonnes and lengths of over 20 metres, the STN-L counts among the heavy semi-low-loaders for construction machinery, industrial plant and other compact oversized loads used by heavy-haulage operators worldwide; Goldhofer competes here chiefly with Nooteboom and Faymonville. Such semi-low-loaders are both sold and rented worldwide, often with ramp and axle configurations tailored to the customer.

On a used trailer, check the condition of the frame and overrun brake device, axles, brakes and tyres, the operation of the hydraulics, steering axles and ramps, and a complete inspection and service history; spare parts run through the Goldhofer service network. Tyre tread depth and age, and the condition of the wheel chocks and warning equipment, also belong in a pre-purchase check.

Sources: SpecCodex register, model data: Goldhofer STN-L, Goldhofer (Memmingen, Hersteller)

Models

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare