Goldhofer STN-L 3
Built: 2022-2026 · Series: STN-L
More machines from model year 2022
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Goldhofer STN-L – semi-low-loaders from Memmingen: STN-L 3 and STN-L 4 range, 9.2 to 11.9 t unladen weight, gross weight up to 62 t, lengths up to over 20 m
Goldhofer of Memmingen in Bavaria is one of the world's leading makers of heavy-haulage and special-transport vehicles. This page covers the STN-L semi-low-loader range with the three-axle STN-L 3, STN-L 3 (225) A and STN-L 3-39/80 A F1 versions and the four-axle STN-L 4 (225) A, STN-L 4 (245) A and STN-L 4-33/80. As is usual with semi-trailers, the tractor unit alone provides the drive and part of the braking effort, while the trailer supplies the axles, brakes, tyres and load area.
Read on 3 more paragraphs
The register lists here 6 versions with unladen weights from 9,200 to 11,900 kg, gross weights from 38,680 to 62,000 kg, lengths from 12,490 to 20,460 mm and a width of 2,550 mm.
With gross weights up to 62 tonnes and lengths of over 20 metres, the STN-L counts among the heavy semi-low-loaders for construction machinery, industrial plant and other compact oversized loads used by heavy-haulage operators worldwide; Goldhofer competes here chiefly with Nooteboom and Faymonville. Such semi-low-loaders are both sold and rented worldwide, often with ramp and axle configurations tailored to the customer.
On a used trailer, check the condition of the frame and overrun brake device, axles, brakes and tyres, the operation of the hydraulics, steering axles and ramps, and a complete inspection and service history; spare parts run through the Goldhofer service network. Tyre tread depth and age, and the condition of the wheel chocks and warning equipment, also belong in a pre-purchase check.
Sources: SpecCodex register, model data: Goldhofer STN-L, Goldhofer (Memmingen, Hersteller)
Technical data
Dimensions and weights
| Width | 2,550 mmcorrect |
|---|---|
| Unladen weight | 10,300 kgcorrect |
| Gross vehicle weight | 45,500 kgcorrect |
Drivetrain and chassis
| Wheels | 12correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Goldhofer STN-L 3 weigh?
The unladen weight is 10,300 kg.
What is the gross vehicle weight of the Goldhofer STN-L 3?
45,500 kg.
Up to what speed is the Goldhofer STN-L 3 approved?
Approved up to 100 km/h.
When was the Goldhofer STN-L 3 built?
Production years: 2022-2026.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
