Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Case IH › MX-MAGNUM Baureihe

Case IH MX-MAGNUM Baureihe

4 models in this series

The MX-MAGNUM Baureihe series from Case IH comprises 4 models.

Case IH MX Magnum – large tractors from Racine, Wisconsin: six-cylinder 8,268 cm³ engines, 147 to 211 kW, MX 210 to MX 285 models, gross weight up to 14 t

Case IH MX 230
Pictured: Case IH MX 230

The Case IH MX Magnum is a large-tractor range built at the American plant in Racine, Wisconsin. The Magnum designation marks Case IH's powerful standard-tractor line above the Utility and Maxxum classes; the MX type combines with a three-digit power number. The register covers the MX 210, MX 230, MX 255 and MX 285 models with six-cylinder diesel engines.

Read on 3 more paragraphs

The register holds 4 versions rated at 147.1 to 211.1 kW (200 to 287 hp), with six-cylinder engines of a uniform 8,268 cm³. Weights range from 9,122 to 11,090 kg, with a gross vehicle weight of up to 14,000 kg. Lengths fall between 5,690 and 5,780 mm, widths between 2,585 and 3,048 mm and heights between 3,150 and 3,240 mm; engine speed is 2,000 rpm.

As four-wheel-drive standard tractors, the MX Magnum range covered the upper power segment for large arable farms, from heavy tillage to haulage work requiring high draft forces. It competed with comparable large tractors from John Deere and New Holland in the same power class.

When buying used, this class calls for checking the engine and injection system, clutch and gearbox, and the four-wheel steering and hydraulic system. Rust on mudguards, cab frame and attachment points, and the condition of the wide tyres, are further checkpoints; spare parts are readily available through the Case IH dealer network.

Sources: SpecCodex register, model data: Case IH MX-MAGNUM Baureihe, Case IH

Models compared

4 of 4 models.

MX 2102002–2005 MX 2302002–2005 MX 2552002–2005 MX 2852002–2005
Power 147.1 kW 172.1 kW 192.7 kW 211.1 kW
Rated speed 2,000 rpm 2,000 rpm 2,000 rpm 2,000 rpm
PTO speed 540/1000 rpm 540/1000 rpm – –
Linkage category Cat III Cat III Cat III Cat III
Cylinders 6 6 6 6
Displacement 8,268 cm³ 8,268 cm³ 8,268 cm³ 8,268 cm³
Fuel tank capacity 492 l 492 l 605 l 605 l
Top speed 40 km/h 40 km/h 40 km/h 40 km/h
Wheelbase 3,005 mm 3,005 mm 3,005 mm 3,005 mm
Length 5,690 mm 5,690 mm 5,690 mm 5,780 mm
Width 3,048 mm 3,048 mm 3,048 mm 2,585 mm
Height 3,150 mm 3,150 mm 3,150 mm 3,240 mm
Unladen weight 9,165 kg 9,122 kg 9,779 kg 11,090 kg

Models

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare