Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Bungartz › Other models

Bungartz Other models

14 models in this series

Bungartz – other models: Munich tool carriers outside the named ranges, from the F40 and F55 to the H1, H2, H5, K5, L3, L4 and RM 158, 5 to 6 hp, air-cooled single-cylinder engines

Bungartz RM158
Pictured: Bungartz RM158

This page gathers the Bungartz tool carriers the register could not assign to a named range: F40, F55, F70, F90, FR, FRN, H1, H2, H5, K5, L3, L4, RM 158 and RM 158 Z. Bungartz was a Munich maker of tool carriers, small self-propelled vehicles for interchangeable implements in agriculture, horticulture and municipal service. The short type codes of a letter and a number distinguish different sizes and equipment levels within the range.

Read on 3 more paragraphs

The register lists here 14 versions; the engines produce 5 to 6 hp, around 4.4 kW, with 199 to 277 cc displacement and one cylinder, run on petrol or a petrol-oil mix at a ratio of 1:25, and turn at 3,000 rpm. The tool carriers weigh 135 to 150 kg, and measure 1,600 mm in length, 420 mm in width and 900 mm in height.

As small, light tool carriers with mixture lubrication, the Bungartz models were built chiefly for work with implements such as a mower bar, tiller or small trailer on tight plots, where larger tractors would have been too heavy or unwieldy.

When buying used, check on these two-stroke tool carriers the condition of the piston and cylinder, correct mixture lubrication, the condition of the clutch and belt drive, the frame and implement mounts, and corrosion on sheet metal and frame parts; spares for the now-discontinued brand are mainly found through collector and vintage-machinery markets.

Sources: SpecCodex register, model data: Bungartz (weitere Modelle)

Models compared

3 of 3 models.

FRN1955–1960 H5from 1900s RM1581954–1971
Power – 5 hp 6 hp
Rated speed 3,000 rpm – 3,000 rpm
Cylinders 1 1 1
Displacement 277 cm³ 200 cm³ 199 cm³
Top speed 19.7 km/h 17.3 km/h –
Unladen weight 150 kg 135 kg –

Models

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare