Bungartz RM158
Built: 1954–1971 · Series: Other models
More machines from model year 1954
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Bungartz – other models: Munich tool carriers outside the named ranges, from the F40 and F55 to the H1, H2, H5, K5, L3, L4 and RM 158, 5 to 6 hp, air-cooled single-cylinder engines
This page gathers the Bungartz tool carriers the register could not assign to a named range: F40, F55, F70, F90, FR, FRN, H1, H2, H5, K5, L3, L4, RM 158 and RM 158 Z. Bungartz was a Munich maker of tool carriers, small self-propelled vehicles for interchangeable implements in agriculture, horticulture and municipal service. The short type codes of a letter and a number distinguish different sizes and equipment levels within the range.
Read on 3 more paragraphs
The register lists here 14 versions; the engines produce 5 to 6 hp, around 4.4 kW, with 199 to 277 cc displacement and one cylinder, run on petrol or a petrol-oil mix at a ratio of 1:25, and turn at 3,000 rpm. The tool carriers weigh 135 to 150 kg, and measure 1,600 mm in length, 420 mm in width and 900 mm in height.
As small, light tool carriers with mixture lubrication, the Bungartz models were built chiefly for work with implements such as a mower bar, tiller or small trailer on tight plots, where larger tractors would have been too heavy or unwieldy.
When buying used, check on these two-stroke tool carriers the condition of the piston and cylinder, correct mixture lubrication, the condition of the clutch and belt drive, the frame and implement mounts, and corrosion on sheet metal and frame parts; spares for the now-discontinued brand are mainly found through collector and vintage-machinery markets.
Sources: SpecCodex register, model data: Bungartz (weitere Modelle)
Technical data
Engine
| Fuel | Gemisch 1:25correct |
|---|---|
| Power | 6 hpcorrect |
| Power | 6 hpcorrect |
| Rated speed | 3,000 rpmcorrect |
| Cylinders | 1correct |
| Displacement | 199 cm³correct |
| Bore | 62 mmcorrect |
| Stroke | 66 mmcorrect |
| Cooling | air-cooledcorrect |
Frequently asked questions
How much power does the Bungartz RM158 have?
The Bungartz RM158 delivers 6 hp.
What engine does the Bungartz RM158 have?
1 cylinders, 199 cm³ displacement, Gemisch 1:25.
When was the Bungartz RM158 built?
Production years: 1954–1971.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.