Start › Tractors › Bungartz › Other models › H5

Bungartz H5

Q: What engine does the Bungartz H5 have?

1 cylinders, 200 cm³ displacement, Gemisch.

Built: from 1900s · Series: Other models

The Bungartz H5 is a machine built by Bungartz. The engine delivers 5 hp, has 1 cylinder, with a displacement of 200 cm³. The unladen weight is 135 kg. Top speed is 17.3 km/h. The engine is air-cooled. Tyres: front 4,00-8 AS, 4,00-12 AS. The fuel is Gemisch. Construction: (Einachser). The gearbox offers 6 forward gears. There are also 1 reverse gears. The PTO runs at 1080 rpm. Rated output across the Bungartz range ranges from 5 to 20 hp; the H5 sits at the bottom of that range with 5 hp. Its immediate neighbours are the FRN above it with 6 hp. Rated output across the Bungartz range ranges from 5 to 20 hp; here the H5 sits at the bottom of that range with 5 hp. 21 Bungartz models across 4 series are on record.

Bungartz – other models: Munich tool carriers outside the named ranges, from the F40 and F55 to the H1, H2, H5, K5, L3, L4 and RM 158, 5 to 6 hp, air-cooled single-cylinder engines

This page gathers the Bungartz tool carriers the register could not assign to a named range: F40, F55, F70, F90, FR, FRN, H1, H2, H5, K5, L3, L4, RM 158 and RM 158 Z. Bungartz was a Munich maker of tool carriers, small self-propelled vehicles for interchangeable implements in agriculture, horticulture and municipal service. The short type codes of a letter and a number distinguish different sizes and equipment levels within the range.

Read on 3 more paragraphs

The register lists here 14 versions; the engines produce 5 to 6 hp, around 4.4 kW, with 199 to 277 cc displacement and one cylinder, run on petrol or a petrol-oil mix at a ratio of 1:25, and turn at 3,000 rpm. The tool carriers weigh 135 to 150 kg, and measure 1,600 mm in length, 420 mm in width and 900 mm in height.

As small, light tool carriers with mixture lubrication, the Bungartz models were built chiefly for work with implements such as a mower bar, tiller or small trailer on tight plots, where larger tractors would have been too heavy or unwieldy.

When buying used, check on these two-stroke tool carriers the condition of the piston and cylinder, correct mixture lubrication, the condition of the clutch and belt drive, the frame and implement mounts, and corrosion on sheet metal and frame parts; spares for the now-discontinued brand are mainly found through collector and vintage-machinery markets.

Sources: SpecCodex register, model data: Bungartz (weitere Modelle)

Technical data

Engine

Fuel	Gemischcorrect
Power	5 hpcorrect
Power	5 hpcorrect
Cylinders	1correct
Displacement	200 cm³correct
Cooling	air-cooledcorrect

Dimensions and weights

Unladen weight	135 kgcorrect

Drivetrain and chassis

Drive	single-axle drivecorrect
Gearbox	3/1- oder 8/2-Getriebecorrect
Forward gears	6correct
Reverse gears	1correct
Front tyres	4, 00-8 AS, 4, 00-12 AScorrect
Top speed	17.3 km/hcorrect

Origin and approval

Construction	(Einachser)correct

Other data

PTO speed	1,080 rpmcorrect

Where this model stands

Power-to-weight ratio: 27.2 kW/t (4 kW / 0.1 t)

Power class: Compact (< 40 hp)

Stronger than 0% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Bungartz H5 have?

The Bungartz H5 delivers 5 hp.

How much does the Bungartz H5 weigh?

The unladen weight is 135 kg.

What engine does the Bungartz H5 have?

1 cylinders, 200 cm³ displacement, Gemisch.

How fast does the Bungartz H5 go?

Top speed is 17.3 km/h.

When was the Bungartz H5 built?

Production years: 19??–?.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Check the weights in the papers against the figures here — attachments change them.
Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
Shift the gearbox cold and warm — jumps only show up at temperature.
Load the hydraulics and watch for sag.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →