AGCO Massey Ferguson MF 7600
5 models in this series
Massey Ferguson MF 7600 (2012–2015) – the six-cylinder upper class from Beauvais: MF 7615 to MF 7626, the last digits as power step, AGCO Power six-cylinder of 6.6 litres with SCR, Dyna-6 and Dyna-VT, 103 to 147 kW
The MF 7600 was the range with which Massey Ferguson merged the MF 6400 and MF 7400 in the class from 140 to 280 hp in 2012 – six-cylinders from Beauvais with the choice between Dyna-6 semi-powershift and stepless Dyna-VT, in the equipment lines Essential, Efficient and Exclusive. The type logic: 76 marks the range, the last two digits the power step – MF 7615 about 150 hp, MF 7618 about 175, MF 7619 about 185, MF 7622 about 215 hp, up to the MF 7626 with about 260 hp – each with power boost for PTO and transport work. The engine in the models recorded here is the AGCO Power six-cylinder of 6.6 litres from Linnavuori at 2,200 rpm, with common-rail injection and SCR exhaust aftertreatment to stage IIIB; the big models from the MF 7624 upward carry the 7.4 litre engine.
Read on 3 more paragraphs
The register lists 5 versions with 103 to 147 kW from the six-cylinder of 6,600 cm³, torque from 660 to 740 Nm, PTO outputs from 135 to 165 hp, lift capacities from 7,100 to 8,100 kg, unladen weights from 6,650 to 7,920 kg, a length of 5,085 mm and heights from 3,110 to 3,190 mm.
The MF 7600 was the tractor of contractors and arable farms that took on the John Deere 6R, Fendt 700 Vario and Claas Arion 600; in 2015 the MF 7700 with emission stage IV followed in the same logic.
On used tractors, operating hours, engine and SCR system, Dyna-6 or Dyna-VT transmission (clutches, oil history, calibration), front-axle and cab suspension, hydraulics and electronics, tyres count; parts run through the AGCO network.
Sources: SpecCodex register, model data: Massey Ferguson MF 7600, Massey Ferguson (AGCO, Hersteller, Beauvais)
Models compared
5 of 5 models.
| MF 76152012–2015 | MF 76162012–2015 | MF 76182012–2015 | MF 76192012–2015 | MF 76222012–2015 | |
|---|---|---|---|---|---|
| Power | 103 kW | 110 kW | 121 kW | 125 kW | 147 kW |
| Rated speed | 2,200 rpm | 2,200 rpm | 2,200 rpm | 2,200 rpm | 2,200 rpm |
| PTO output | 135 hp | – | 165 hp | – | – |
| PTO speed | 540/540E/1000/1000E | – | 540/540E/1000/1000E | – | – |
| Linkage category | Cat III | – | Cat III | – | – |
| Lifting capacity | 7,100 kg | – | 8,100 kg | – | – |
| Cylinders | 6 | 6 | 6 | 6 | 6 |
| Displacement | 6,600 cm³ | 6,600 cm³ | 6,600 cm³ | 6,600 cm³ | 6,600 cm³ |
| Torque | 660 Nm | – | 740 Nm | – | – |
| Fuel tank capacity | 335 l | – | 335 l | – | – |
| Top speed | 40 km/h | 40 km/h | 40 km/h | 40 km/h | 40 km/h |
| Wheelbase | 2,870 mm | 2,870 mm | 2,870 mm | 3,000 mm | 3,000 mm |
| Length | – | – | – | 5,085 mm | 5,085 mm |
| Height | – | – | – | 3,110 mm | 3,190 mm |
| Unladen weight | 6,650 kg | 6,650 kg | 6,850 kg | 7,560 kg | 7,920 kg |
Models
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
MF 7615
The AGCO Massey Ferguson MF 7615 belongs to the MF 7600 series. Production: 2012–2015. The engine delivers 140 hp...
MF 7616
The AGCO Massey Ferguson MF 7616 is a model in the MF 7600 series. Production: 2012–2015. The engine delivers 150 hp...
MF 7618
With the MF 7618, AGCO Massey Ferguson offers a model from the MF 7600 series. Production: 2012–2015. The engine...
MF 7619
The MF 7619 from AGCO Massey Ferguson is part of the MF 7600 series. Production: 2012–2015. The engine delivers 170...
MF 7622
The AGCO Massey Ferguson MF 7622 belongs to the MF 7600 series. Production: 2012–2015. The engine delivers 200 hp...
