Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › AGCO Massey Ferguson › MF 7600 › MF 7616

AGCO Massey Ferguson MF 7616

Built: 2012–2015 · Series: MF 7600

More machines from model year 2012

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The AGCO Massey Ferguson MF 7616 is a model in the MF 7600 series. Production: 2012–2015. The engine delivers 150 hp (110 kW), has 6 cylinders, with a displacement of 6,600 cm³. Rated speed is 2,200 rpm. The unladen weight is 6,650 kg. The wheelbase measures 2,870 mm. Top speed is 40 km/h. Transmission: Ausstattungsabhängig. The engine is water-cooled. Tyres: front 420 / 85 R 28, rear 520 / 85 R 38. The fuel is diesel. The MF 7600 series covers 5 models. Rated output within it ranges from 140 to 200 hp; the MF 7616 sits in the lower part of that range with 150 hp. Its immediate neighbours are the MF 7615 below it with 140 hp and the MF 7618 above it with 165 hp. Unladen weight within it ranges from 6,650 to 7,920 kg; here the MF 7616 sits at the bottom of that range with 6,650 kg. 146 AGCO Massey Ferguson models across 33 series are on record.

Massey Ferguson MF 7600 (2012–2015) – the six-cylinder upper class from Beauvais: MF 7615 to MF 7626, the last digits as power step, AGCO Power six-cylinder of 6.6 litres with SCR, Dyna-6 and Dyna-VT, 103 to 147 kW

The MF 7600 was the range with which Massey Ferguson merged the MF 6400 and MF 7400 in the class from 140 to 280 hp in 2012 – six-cylinders from Beauvais with the choice between Dyna-6 semi-powershift and stepless Dyna-VT, in the equipment lines Essential, Efficient and Exclusive. The type logic: 76 marks the range, the last two digits the power step – MF 7615 about 150 hp, MF 7618 about 175, MF 7619 about 185, MF 7622 about 215 hp, up to the MF 7626 with about 260 hp – each with power boost for PTO and transport work. The engine in the models recorded here is the AGCO Power six-cylinder of 6.6 litres from Linnavuori at 2,200 rpm, with common-rail injection and SCR exhaust aftertreatment to stage IIIB; the big models from the MF 7624 upward carry the 7.4 litre engine.

Read on 3 more paragraphs

The register lists 5 versions with 103 to 147 kW from the six-cylinder of 6,600 cm³, torque from 660 to 740 Nm, PTO outputs from 135 to 165 hp, lift capacities from 7,100 to 8,100 kg, unladen weights from 6,650 to 7,920 kg, a length of 5,085 mm and heights from 3,110 to 3,190 mm.

The MF 7600 was the tractor of contractors and arable farms that took on the John Deere 6R, Fendt 700 Vario and Claas Arion 600; in 2015 the MF 7700 with emission stage IV followed in the same logic.

On used tractors, operating hours, engine and SCR system, Dyna-6 or Dyna-VT transmission (clutches, oil history, calibration), front-axle and cab suspension, hydraulics and electronics, tyres count; parts run through the AGCO network.

Sources: SpecCodex register, model data: Massey Ferguson MF 7600, Massey Ferguson (AGCO, Hersteller, Beauvais)

Technical data

Engine

Fueldieselcorrect
Power150 hp (110 kW)correct
Rated speed2,200 rpmcorrect
Cylinders6correct
Displacement6,600 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Wheelbase2,870 mmcorrect
Unladen weight6,650 kgcorrect

Drivetrain and chassis

Drivefour-wheel drivecorrect
GearboxAusstattungsabhängigcorrect
Front tyres420 / 85 R 28correct
Rear tyres520 / 85 R 38correct
Top speed40 km/hcorrect

Where this model stands

Power-to-weight ratio: 16.5 kW/t (110 kW / 6.7 t)

Power class: Large (100–180 hp)

Stronger than 83% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the AGCO Massey Ferguson MF 7616 have?

The AGCO Massey Ferguson MF 7616 delivers 150 hp.

How much does the AGCO Massey Ferguson MF 7616 weigh?

The unladen weight is 6,650 kg.

What engine does the AGCO Massey Ferguson MF 7616 have?

6 cylinders, 6,600 cm³ displacement, Diesel.

How fast does the AGCO Massey Ferguson MF 7616 go?

Top speed is 40 km/h.

When was the AGCO Massey Ferguson MF 7616 built?

Production years: 2012–2015.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare