Start › Tractors › AGCO Allis › 9600 series

AGCO Allis 9600 series

8 models in this series

The 9600 series from AGCO Allis comprises 8 models. Rated output ranges from 135 to 198 hp.

AGCO Allis 9600 series (1990s) – the orange big tractors of the young AGCO: 9630 to 9695, the middle digit as power step, final digit 0 with air-cooled Deutz, final digit 5 with Cummins engines

AGCO Allis was the brand with which the AGCO Corporation, founded in 1990, continued the heritage of Allis-Chalmers and Deutz-Allis in North America – orange tractors that after the separation from Deutz at first still carried air-cooled Deutz engines and were converted step by step to Cummins. The 9600 series is exactly that transition: the type logic gives the power step in the middle digit – 9630 about 135 hp, 9650 about 155, 9670 about 175, 9690 about 198 hp – and the engine in the final digit: 0 for the models with air-cooled Deutz six-cylinders of the 913 (6.1 litre) and 513 (9.6 litre) series, 5 for the successors 9635 to 9695 with water-cooled Cummins six-cylinders of the B5.9 and C8.3 series. The register span of 6,128 to 9,572 cm³ and the engine makers Deutz and Cummins show that change.

Read on 3 more paragraphs

The register lists 8 versions with 99.3 to 145.6 kW from six-cylinders at 2,200 to 2,400 rpm, torque from 533 to 887 Nm, unladen weights from 6,566 to 8,433 kg, lengths from 4,762 to 5,080 mm, widths from 2,438 to 2,489 mm and heights from 3,073 to 3,137 mm.

The 9600s were built in the USA and sold only in North America; in 2001 AGCO dropped the AGCO Allis brand in favour of AGCO, and later the programme was absorbed into Massey Ferguson and Challenger.

On used tractors, operating hours, cooling blower and cylinder heads on the Deutz models, injection and turbocharger on the Cummins models, the powershift transmission, hydraulics and cab count; parts run through AGCO, Deutz and Cummins.

Sources: SpecCodex register, model data: AGCO Allis 9600er-Serie, AGCO Corporation (manufacturer)

Models compared

8 of 8 models.

	96301993–1995	96351994–1997	96501994–1995	96551994–1998	96701994–1995	96751994–1998	96901994–1995	96951994–1998
Power	99.3 kW	100.8 kW	115.5 kW	115.5 kW	130.2 kW	130.2 kW	145.6 kW	145.6 kW
Rated speed	2,400 rpm	2,200 rpm	2,400 rpm	2,200 rpm	2,300 rpm	2,200 rpm	2,300 rpm	2,200 rpm
PTO speed	540/1000 rpm	540/1000 rpm	540/1000 rpm	540/1000 rpm	–	–	–	–
Linkage category	Cat II/III/IIIN	Cat II/III/IIIN	Cat II/III/IIIN	Cat II/III/IIIN	Cat II/III/IIIN	Cat II/III/IIIN	Cat II/III/IIIN	Cat II/III/IIIN
Cylinders	6	6	6	6	6	6	6	6
Displacement	6,128 cm³	7,637 cm³	6,128 cm³	7,637 cm³	9,572 cm³	8,705 cm³	9,572 cm³	8,705 cm³
Torque	533 Nm	597 Nm	614 Nm	659 Nm	746 Nm	815 Nm	798 Nm	887 Nm
Fuel tank capacity	253.5 l	253.5 l	253.5 l	253.5 l	367 l	367 l	367 l	367 l
Forward gears	18	18	18	18	18	18	18	18
Reverse gears	9	9	9	9	9	9	9	9
Top speed	40 km/h	40 km/h	40 km/h	40 km/h	40 km/h	40 km/h	40 km/h	40 km/h
Wheelbase	3,129 mm	3,129 mm	3,129 mm	3,129 mm	3,061 mm	3,129 mm	2,921 mm	2,959 mm
Length	4,762 mm	4,762 mm	4,762 mm	4,762 mm	5,080 mm	5,080 mm	5,080 mm	5,080 mm
Width	2,438 mm	2,438 mm	2,438 mm	2,438 mm	2,438 mm	2,489 mm	2,438 mm	2,489 mm
Height	3,137 mm	3,137 mm	3,137 mm	3,137 mm	3,073 mm	3,073 mm	3,073 mm	3,073 mm
Unladen weight	6,714 kg	6,566 kg	7,204 kg	7,350 kg	7,303 kg	6,604 kg	8,210 kg	8,433 kg

AGCO Allis9650no photo

9650

1994–1995 · 34 data points

The AGCO Allis 9650 is a model in the 9600er series. Production: 1994–1995. The engine delivers 157 hp (115.5 kW),...

AGCO Allis 9600 series

AGCO Allis 9600 series (1990s) – the orange big tractors of the young AGCO: 9630 to 9695, the middle digit as power step, final digit 0 with air-cooled Deutz, final digit 5 with Cummins engines

Models compared

Models

Tractor in 3D section

9630

9635

9655

9670

9675

9690

9695

9650