Zetor 11441 (4660 kg)
Built: 2007–2009 · Series: Forterra-III-Baureihe
More machines from model year 2007
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Zetor Forterra III – tractors 9641, 10641, 11441 and 12441 from Brno, four-cylinder diesels from 66 to 90 kW with a uniform 4.16-litre displacement, third generation of the modern Forterra series
The Forterra series replaced Zetor's older UR generations in the early 2000s and has since been developed through several generations; the types listed here, 9641, 10641, 11441 and 12441, belong to the third generation, Forterra III. The tractors continue to be built at Zetor's home plant in Brno. The four-digit type numbers order the models by power class, with the first two to three digits roughly reflecting the horsepower.
Read on 3 more paragraphs
The register lists four versions here with 66.2 to 89.7 kW from four-cylinder diesel engines with a uniform 4,156 cm³ displacement. Rated speed is 2,200 rpm, unladen weight ranges from 4,570 to 4,660 kg with lengths from 4,240 to 4,670 mm, a width of 2,165 mm and a height of 2,760 mm; torque lies between 391 and 525 Nm.
The Forterra III targets medium-sized farms in Europe and beyond and, as a modern Zetor series, competes with comparable mid-range tractors from Deutz-Fahr, Case IH and New Holland, with Zetor drawing on the advantage of a comparatively affordable entry price in this class.
When buying used, check the condition of the clutch and gearbox, tightness of the hydraulic pump and lift cylinders, the electronics of the cab equipment, and wear on the front axle and steering on the four-wheel-drive models. Parts are well available through Zetor's distribution network in Europe.
Sources: SpecCodex register, model data: Zetor Forterra-III-Baureihe, Zetor (manufacturer)
Technical data
Engine
| Engine | Z 1403, 81 kW (110 KM)correct |
|---|---|
| Fuel | dieselcorrect |
| Power | 110 hp (80.9 kW)correct |
| Rated speed | 2,200 rpmcorrect |
| Torque | 480 Nmcorrect |
| Cylinders | 4correct |
| Displacement | 4,156 cm³correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 4,670 mmcorrect |
|---|---|
| Width | 2,165 mmcorrect |
| Height | 2,760 mmcorrect |
| Wheelbase | 2,397 mmcorrect |
| Ground clearance | 455 mmcorrect |
| Unladen weight | 4,660 kgcorrect |
Drivetrain and chassis
| Drive | four-wheel drivecorrect |
|---|---|
| Gearbox | 24 V/18 Rcorrect |
| Forward gears | 24correct |
| Reverse gears | 18correct |
| Front tyres | 420/70 R 24 AScorrect |
| Rear tyres | 520/70 R 38 AScorrect |
| Top speed | 40 km/hcorrect |
Working data
| Fuel tank capacity | 180 lcorrect |
|---|
Origin and approval
| Construction | unit construction (no separate frame)correct |
|---|
Other data
| Linkage category | Cat IIcorrect |
|---|---|
| PTO speed | 540/540E/1000 rpmcorrect |
Where this model stands
Power-to-weight ratio: 17.4 kW/t (81 kW / 4.7 t)
Power class: Large (100–180 hp)
Stronger than 70% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Zetor 11441 have?
The Zetor 11441 delivers 110 hp.
How much does the Zetor 11441 weigh?
The unladen weight is 4,660 kg.
What engine does the Zetor 11441 have?
4 cylinders, 4,156 cm³ displacement, Diesel.
How fast does the Zetor 11441 go?
Top speed is 40 km/h.
What are the dimensions of the Zetor 11441?
4,670 mm × 2,165 mm × 2,760 mm.
When was the Zetor 11441 built?
Production years: 2007–2009.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 27 individual figures for this model. They come from 3 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.