Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Zanello › AT 250

Zanello AT 250

Built: 2006 · Series: Other models

More machines from model year 2006

The photo shows the C-417 from the same series. Source: https://www.tractordata.com/farm-tractors/005/2/5/5255-zanel

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Zanello AT 250 is a machine built by Zanello. Production: 2006. The engine delivers 250 hp (190 kW). The engine comes from International. The engine is water-cooled. The model was built in Rio Tercero, Córdoba, Argentina. Rated output across the Zanello range ranges from 60 to 400 hp; the AT 250 sits in the middle of that range with 250 hp. Its immediate neighbours are the http://tractors.wikia.com/wiki/File:Zanello_540_C_Turbo_4WD-1998.jpg below it with 240 hp and the Pauny Zanello 500C above it with 260 hp. Rated output across the Zanello range ranges from 45 to 300 kW; here the AT 250 sits in the middle of that range with 190 kW. 68 Zanello models across 4 series are on record.

Zanello – other models: Argentine tractors outside the named ranges, from the 200 series to Z-Trac, 75 to 300 kW, Cummins, MWM, Scania and in-house Zanello engines

This page gathers Zanello tractors outside the named ranges, from the classic 200 and 400 series types of the 1960s and 1970s to the later Turbo, UD and Z-Trac ranges. Zanello is an Argentine tractor and farm machinery maker from Córdoba province and for decades was among Argentina's most important domestic tractor builders. Engines come from Cummins, the Brazilian maker MWM International Motores, International and Scania, and from Zanello itself, partly under licence from VM Motori.

Read on 3 more paragraphs

The register lists 37 versions here with 75 to 300 kW, or 100 to 400 hp, from four- to six-cylinder diesel engines with rated speeds of 2,100 to 2,500 rpm.

Zanello's tractors shaped the mechanisation of farming on the Argentine pampas and competed domestically with Fiat, Deutz and later international brands; the range of engines from Cummins to Scania reflects the changing supplier relationships across the company's history. The Forestry versions listed in the register also show Zanello tractors used in forestry work, with reinforced frames and protective structures.

When buying used, older models call for checking the condition of the injection pump and turbocharger, rust on the chassis and wings, and hydraulic tightness; since Zanello has little presence outside South America, parts supply depends heavily on Argentine specialist dealers and the engine makers Cummins, MWM and Scania.

Sources: SpecCodex register, model data: Zanello (weitere Modelle)

Technical data

Engine

Engine makeInternationalcorrect
Power250 hp (190 kW)correct
Coolingwater-cooledcorrect

Drivetrain and chassis

Drivefour-wheel driveWDcorrect

Origin and approval

PlantRio Tercero, Córdoba, Argentinacorrect

Frequently asked questions

How much power does the Zanello AT 250 have?

The Zanello AT 250 delivers 250 hp.

When was the Zanello AT 250 built?

Production years: 2006.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare