Zanello 450
Series: Other models
The Zanello 450 is a tractor made by Zanello. The engine produces 120 kW.
It runs on diesel; the engine is water-cooled. It was replaced by the Pauny 450C. Within the range, rated power spans from 75 to 300 kW; with 120 kW, the 450 sits in the mid-field. Directly alongside are the UD 150 DT with 110 kW below and the (Tractomade) 480M forestry with 130 kW above.
Technical data
Engine
| Engine make | Zanellocorrect |
|---|---|
| Engine model | W56NTcorrect |
| Fuel | dieselcorrect |
| Power | 160 hp (120 kW)correct |
| Cooling | water-cooledcorrect |
Drivetrain and chassis
| Drive | four-wheel driveWDcorrect |
|---|
Origin and approval
| Plant | Las Varillas, Córdoba, Argentinacorrect |
|---|---|
| Successor | Pauny 450Ccorrect |
Frequently asked questions
How much power does the Zanello 450 have?
The Zanello 450 delivers 160 hp.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
(Maquinarias) 540C
(Tractomade) 480M forestry
(Tractomade) 540M
(Tractomade) 540M forestry
220 M
230 CC
250 CC Turbo
250 DT
460
460 C
500 C
500 C Turbo
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.