StartTractorsZanello › 460 C

Zanello 460 C

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Zanello 460 C is a tractor from Zanello. The six-cylinder engine produces 120 kW. Rated speed is 2,500 rpm.

It runs on diesel; the engine is water-cooled. It was replaced by the Pauny 460C. Within the range, rated power spans from 75 to 300 kW; with 120 kW, the 460 C sits in the mid-field. Directly alongside are the UD 150 DT with 110 kW below and the (Tractomade) 480M forestry with 130 kW above.

Technical data

Engine

Engine makeCumminscorrect
Engine model6BT5.9correct
Fueldieselcorrect
Power160 hp (120 kW)correct
Rated speed2,500 rpmcorrect
Cylinders6correct
Coolingwater-cooledcorrect

Drivetrain and chassis

Drivefour-wheel driveWDcorrect
Forward gears12correct
Reverse gears4correct

Origin and approval

PlantLas Varillas, Córdoba, Argentinacorrect
SuccessorPauny 460Ccorrect

Frequently asked questions

How much power does the Zanello 460 C have?

The Zanello 460 C delivers 160 hp.

What engine does the Zanello 460 C have?

6 cylinders, Diesel.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare