Technical register for agricultural, construction and commercial machinery · sourced data
Scanner Parts Sign in
Start › Electric motors › WAT › Q3H › Q3H132S2DE

WAT Q3H132S2DE

Series: Q3H

Source: abb.com

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The WAT Q3H132S2DE is a three-phase induction motor built by WAT. The rated output is 9 kW. The motor is two-pole, which at 50 Hz gives a synchronous speed of 3,000 rpm. The rated voltage is 400 V. The housing is frame size 132 S in foot-mounted form. The protection class is IP55. The efficiency is 90.6 per cent at full load, 91 per cent at 75 per cent load and 90.4 per cent at half load. The mounting arrangement to IEC 60034-7 is V1. The motor is built in Turkey. The data is based on the Australian MEPS registration under the GEMS Determination 2019; measured to IEC 60034-2-1 (Edition 2.0). Rated output across the WAT range ranges from 0.75 to 22 kW; the Q3H132S2DE sits in the lower part of that range with 9 kW. Its immediate neighbours are the Q3H112M2D below it with 5.5 kW and the Q3H132M2A above it with 11 kW. 11 WAT models are on record.

WAT – Q3H series at a glance

The Q3H series from WAT comprises 11 models in the register, in the Electric motors group. Rated power ranges from 1 to 22 kW. Listed in the register: Q3H112M2D, Q3H132M2A, Q3H132S2DE, Q3H160L2C.

Sources: SpecCodex-Register (eigene Daten)

Technical data

Engine

Rated output9 kWcorrect

Electrical data

Rated voltage400 Vcorrect
Number of poles2correct
Protection classIP55correct
Frame size132 S (foot)correct
Mounting (IEC 60034-7)V1correct
Efficiency at full load90.6 %correct
Efficiency at 75 % load91 %correct
Efficiency at half load90.4 %correct

Origin and approval

Country of manufactureTurkeycorrect

Other data

Standard appliedGreenhouse and Energy Minimum Standards (Three Phase Electric Motors) Determination 2019correct
Test methodIEC 60034-2-1 (Edition 2.0)correct

Frequently asked questions

How much power does the WAT Q3H132S2DE have?

The WAT Q3H132S2DE delivers 9 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 21 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Q3H112M2D

Q3H132M2A

Q3H160L2C

Q3H160L2D

Q3H160M2D

Q3H80M2C

Q3H80M2D

Q3H90L2C

Q3H90L2D

Q3HS100L2C

Sources: Energy Rating — Australian government equipment register (retrieved August 2026) · How we check the data

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare