Valtra S286 – specifications
Series: S-Serie
Build year not documented · Data origin: Manufacturer information · sources
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
S416 (S-Serie series) by Valtra: six-cylinder diesel engine rated at 309 kW (420 hp), in production since 2023 as the heaviest standard tractor in the range.
The S-Serie is Valtra's line of the heaviest and most powerful fixed-axle standard tractors, a segment clearly set apart from the manufacturer's smaller series, from the Finnish, AGCO-owned maker, by size and pulling power.
Read on 3 more paragraphs
The S416 is powered by a six-cylinder diesel engine of 8,400 cm³ displacement, delivering 309 kW (420 hp) at 1,950 rpm. At a permissible gross weight of 16,000 kg, an unladen weight of 12,000 kg and a top speed of 50 km/h, the tractor is one of the most powerful standard tractors in its class, with a payload reserve of about 4,000 kg over its unladen weight.
Tractors of this power class pull the widest and heaviest cultivation equipment in modern large-scale arable farming and drive the most demanding stationary and mobile implements through the 540 or 1,000 rpm power take-off. The 50 km/h top speed allows brisk road travel between widely scattered fields.
On a used S416, it is especially worth checking the exhaust after-treatment system and the complex engine electronics, since such a powerful six-cylinder engine in this class carries highly developed emissions control systems. Tyres and axle bearings should also be closely assessed given the tractor's high overall weight, along with the cab mounts for wear after intensive use in the field over many seasons.
Sources: SpecCodex-Register: Kennwerte des Modells S416
Technical data
Engine
| Maximum torque | 1250/1400 N·mcorrect |
|---|---|
| Cylinders | 6correct |
| Displacement | 8,400 cm³correct |
| Exhaust aftertreatment | Stage Vcorrect |
Drivetrain and chassis
| Gearbox | ML260 continuously variable transmissioncorrect |
|---|---|
| Top speed | 53 km/hcorrect |
Working data
| Hydraulic flow | 200 oder 200+200 l/mincorrect |
|---|
Other data
| Front linkage lift capacity | 5,800 daNcorrect |
|---|---|
| Rear linkage lift capacity | 12,000 daNcorrect |
Frequently asked questions
What engine does the Valtra S286 have?
6 cylinders, 8,400 cm³ displacement.
How fast does the Valtra S286 go?
Top speed is 53 km/h.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: valtra.com (retrieved August 2026) · Data sources and cross-checks
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
