Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Valtra › S416

Valtra S416

Built: 2023 · Series: S-Serie

More machines from model year 2023

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the S416, Valtra offers a model from the S series. Production: 2023. The engine delivers 420 hp (309 kW), has 6 cylinders, with a displacement of 8,400 cm³. Rated speed is 1,950 rpm. The machine is 6,235 mm long and 3,637 mm high. The unladen weight is 12,000 kg. Ground clearance is 528 mm. Top speed is 50 km/h. Tyres: front max 900/60R42 + 650/60R34 min 710/70R42 + 600/70R30, rear min. hinten SRI 975 max. hinten SRI1025. The gross vehicle weight is 16,000 kg. The fuel is diesel. Construction: frameless unit construction. Around Wird noch Produziert units were built. Rated output across the Valtra range ranges from 50 to 420 hp; the S416 sits at the top of that range with 420 hp. Its immediate neighbours are the S374 below it with 370 hp. Unladen weight across the Valtra range ranges from 2,450 to 12,000 kg; here the S416 sits at the top of that range with 12,000 kg. 782 Valtra models across 32 series are on record.

S416 (S-Serie series) by Valtra: six-cylinder diesel engine rated at 309 kW (420 hp), in production since 2023 as the heaviest standard tractor in the range.

The S-Serie is Valtra's line of the heaviest and most powerful fixed-axle standard tractors, a segment clearly set apart from the manufacturer's smaller series, from the Finnish, AGCO-owned maker, by size and pulling power.

Read on 3 more paragraphs

The S416 is powered by a six-cylinder diesel engine of 8,400 cm³ displacement, delivering 309 kW (420 hp) at 1,950 rpm. At a permissible gross weight of 16,000 kg, an unladen weight of 12,000 kg and a top speed of 50 km/h, the tractor is one of the most powerful standard tractors in its class, with a payload reserve of about 4,000 kg over its unladen weight.

Tractors of this power class pull the widest and heaviest cultivation equipment in modern large-scale arable farming and drive the most demanding stationary and mobile implements through the 540 or 1,000 rpm power take-off. The 50 km/h top speed allows brisk road travel between widely scattered fields.

On a used S416, it is especially worth checking the exhaust after-treatment system and the complex engine electronics, since such a powerful six-cylinder engine in this class carries highly developed emissions control systems. Tyres and axle bearings should also be closely assessed given the tractor's high overall weight, along with the cab mounts for wear after intensive use in the field over many seasons.

Sources: SpecCodex-Register: Kennwerte des Modells S416

Technical data

Engine

Fueldieselcorrect
Power420 hp (309 kW)correct
Rated speed1,950 rpmcorrect
Maximum torque1750/1750 N·mcorrect
Cylinders6correct
Displacement8,400 cm³correct
Exhaust aftertreatmentStage Vcorrect

Dimensions and weights

Length6,235 mmcorrect
Height3,637 mmcorrect
Ground clearance528 mmcorrect
Unladen weight12,000 kgcorrect
Gross vehicle weight16,000 kgcorrect

Drivetrain and chassis

GearboxCVT Getriebecorrect
Front tyresmax 900/60R42 + 650/60R34 min 710/70R42 + 600/70R30correct
Rear tyresmin. hinten SRI 975 max. hinten SRI1025correct
Top speed50 km/hcorrect

Working data

Hydraulic flow200 oder 200+200 l/mincorrect

Origin and approval

Constructionframeless unit constructioncorrect
Units builtWird noch Produziertcorrect

Other data

Front linkage lift capacity5,800 daNcorrect
Rear linkage lift capacity12,000 daNcorrect

Where this model stands

Power-to-weight ratio: 25.8 kW/t (309 kW / 12 t)

Power class: Heavy (> 180 hp)

Stronger than 99% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Valtra S416 have?

The Valtra S416 delivers 420 hp.

How much does the Valtra S416 weigh?

The unladen weight is 12,000 kg.

What is the gross vehicle weight of the Valtra S416?

16,000 kg.

What engine does the Valtra S416 have?

6 cylinders, 8,400 cm³ displacement, Diesel.

How fast does the Valtra S416 go?

Top speed is 50 km/h.

What are the dimensions of the Valtra S416?

6,235 mm × 3,637 mm.

When was the Valtra S416 built?

Production years: 2023.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 25 individual figures for this model. They come from 3 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Used equipment offers
1 current listings for Valtra S416 on Hutnia.com.
View offers on Hutnia.com →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2] [3]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare