Valtra N 174
Built: 2015–Still in production · Series: N
More machines from model year 2015
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Valtra N range – the four-cylinder mid-range from Suolahti: N93 to N174, power class in the type number, 73 to 148 kW, displacement of 3,300 to 4,900 cm³, Sisu engines
Since 2000 the N range has been Valtra's four-cylinder mid-range, the Finnish maker from Suolahti that emerged in 1997 from the sale of Valmet to Sisu and has belonged to AGCO since 2004. The type logic orders the letters A, N, T and S by cylinder count and size – A the compact class, N the four-cylinders, T the six-cylinders, S the big tractors – the following number roughly gives the power class in hp, so N174 stands for about 175 hp and N93 for about 95 hp. The engines come from the company's own Linnavuori plant, which traded under the Sisu name before it merged into AGCO Power in 2004; the suffixes HiTech, Active, Versu and Direct mark transmission and equipment steps.
Read on 3 more paragraphs
The register lists here 6 versions with 73 to 148 kW (99 to 165 hp) from three- to four-cylinders of 3,300 to 4,900 cm³, torque from 430 to 540 Nm at about 2,200 rpm, unladen weights from 4,700 to 6,300 kg, lengths from 4,329 to 4,664 mm, widths from 2,277 to 2,550 mm and heights from 2,825 to 2,960 mm.
The N range is Valtra's bread-and-butter tractor for the mixed arable and grassland farms of Central and Northern Europe and an important model in Scandinavia and Brazil, where AGCO runs a second Valtra plant; it competes with the four-cylinder mid-ranges of John Deere, Case IH and Massey Ferguson.
On used tractors, operating hours, the condition of the Sisu engine and injection, shuttle transmission and powershift steps (Versu) or stepless transmission (Direct), hydraulic output, front-loader mounting and rust on cab and mudguards count; parts run through Valtra and AGCO.
Sources: SpecCodex register, model data: Valtra N, Valtra (AGCO, Hersteller)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 165 hp (148 kW)correct |
| Rated speed | 2,100 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 4,900 cm³correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 4,660 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Height | 2,960 mmcorrect |
| Wheelbase | 2,670 mmcorrect |
| Ground clearance | 550 mmcorrect |
| Unladen weight | 6,300 kgcorrect |
Drivetrain and chassis
| Drive | four-wheel drivecorrect |
|---|---|
| Gearbox | 24/24 (30/30) (continuously variable)correct |
| Front tyres | 14.9R28correct |
| Rear tyres | 620/70 R 42correct |
| Top speed | 50 km/hcorrect |
Working data
| Fuel tank capacity | 160 lcorrect |
|---|
Origin and approval
| Units built | Aktuell nicht Bekanntcorrect |
|---|
Where this model stands
Power-to-weight ratio: 23.5 kW/t (148 kW / 6.3 t)
Power class: Large (100–180 hp)
Stronger than 91% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Valtra N 174 have?
The Valtra N 174 delivers 165 hp.
How much does the Valtra N 174 weigh?
The unladen weight is 6,300 kg.
What engine does the Valtra N 174 have?
4 cylinders, 4,900 cm³ displacement, Diesel.
How fast does the Valtra N 174 go?
Top speed is 50 km/h.
What are the dimensions of the Valtra N 174?
4,660 mm × 2,550 mm × 2,960 mm.
When was the Valtra N 174 built?
Production years: 2015–Noch in Produktion.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 21 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.