Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Valtra › N123

Valtra N123

Built: 2011 · Series: N

More machines from model year 2011

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Valtra N123 belongs to the N series. Production: 2011. The engine delivers 137 hp (101 kW), has 4 cylinders, with a displacement of 4,400 cm³. Torque is 540 Nm. The machine is 4,664 mm long, 2,538 mm wide and 2,875 mm high. The unladen weight is 5,200 kg. The wheelbase measures 2,655 mm. Ground clearance is 480 mm. Top speed is 40 km/h. The tank holds 230 litres. Tyres: front 460/85R38, rear 380/85R28. The gross vehicle weight is 10,000 kg. The machine runs on 4 wheels. The gearbox offers 20 gears. The N series covers 6 models. Rated output within it ranges from 99 to 165 hp; the N123 sits in the middle of that range with 137 hp. Its immediate neighbours are the N121 below it with 133 hp and the N 174 above it with 165 hp. Unladen weight within it ranges from 4,700 to 6,300 kg; here the N123 sits in the lower part of that range with 5,200 kg. 782 Valtra models across 32 series are on record.

Valtra N range – the four-cylinder mid-range from Suolahti: N93 to N174, power class in the type number, 73 to 148 kW, displacement of 3,300 to 4,900 cm³, Sisu engines

Since 2000 the N range has been Valtra's four-cylinder mid-range, the Finnish maker from Suolahti that emerged in 1997 from the sale of Valmet to Sisu and has belonged to AGCO since 2004. The type logic orders the letters A, N, T and S by cylinder count and size – A the compact class, N the four-cylinders, T the six-cylinders, S the big tractors – the following number roughly gives the power class in hp, so N174 stands for about 175 hp and N93 for about 95 hp. The engines come from the company's own Linnavuori plant, which traded under the Sisu name before it merged into AGCO Power in 2004; the suffixes HiTech, Active, Versu and Direct mark transmission and equipment steps.

Read on 3 more paragraphs

The register lists here 6 versions with 73 to 148 kW (99 to 165 hp) from three- to four-cylinders of 3,300 to 4,900 cm³, torque from 430 to 540 Nm at about 2,200 rpm, unladen weights from 4,700 to 6,300 kg, lengths from 4,329 to 4,664 mm, widths from 2,277 to 2,550 mm and heights from 2,825 to 2,960 mm.

The N range is Valtra's bread-and-butter tractor for the mixed arable and grassland farms of Central and Northern Europe and an important model in Scandinavia and Brazil, where AGCO runs a second Valtra plant; it competes with the four-cylinder mid-ranges of John Deere, Case IH and Massey Ferguson.

On used tractors, operating hours, the condition of the Sisu engine and injection, shuttle transmission and powershift steps (Versu) or stepless transmission (Direct), hydraulic output, front-loader mounting and rust on cab and mudguards count; parts run through Valtra and AGCO.

Sources: SpecCodex register, model data: Valtra N, Valtra (AGCO, Hersteller)

Technical data

Engine

Power137 hp (101 kW)correct
Torque540 Nmcorrect
Cylinders4correct
Displacement4,400 cm³correct

Dimensions and weights

Length4,664 mmcorrect
Width2,538 mmcorrect
Height2,875 mmcorrect
Wheelbase2,655 mmcorrect
Ground clearance480 mmcorrect
Unladen weight5,200 kgcorrect
Gross vehicle weight10,000 kgcorrect

Drivetrain and chassis

Gears20correct
Wheels4correct
Front tyres460/85R38correct
Rear tyres380/85R28correct
Top speed40 km/hcorrect

Working data

Fuel tank capacity230 lcorrect

Where this model stands

Power-to-weight ratio: 19.4 kW/t (101 kW / 5.2 t)

Power class: Large (100–180 hp)

Stronger than 80% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Valtra N123 have?

The Valtra N123 delivers 137 hp.

How much does the Valtra N123 weigh?

The unladen weight is 5,200 kg.

What is the gross vehicle weight of the Valtra N123?

10,000 kg.

What engine does the Valtra N123 have?

4 cylinders, 4,400 cm³ displacement.

How fast does the Valtra N123 go?

Top speed is 40 km/h.

What are the dimensions of the Valtra N123?

4,664 mm × 2,538 mm × 2,875 mm.

When was the Valtra N123 built?

Production years: 2011.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 23 individual figures for this model. They come from 3 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Used equipment offers
1 current listings for Valtra N123 on Hutnia.com.
View offers on Hutnia.com →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2] [3]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare