Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Valmet/valtra › Other models › Valmet 8450

Valmet/valtra 8450

Built: 2000 · Series: Other models

More machines from model year 2000

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Valmet 8450 comes from Valmet/valtra. Production: 2000. The engine delivers 103 kW, has 6 cylinders, with a displacement of 6,598 cm³. The machine is 4,950 mm long and 2,390 mm wide. The unladen weight is 5,170 kg. The gross vehicle weight is 9,000 kg. Rated output across the Valmet/valtra range ranges from 55.2 to 118 kW; the Valmet 8450 sits in the upper part of that range with 103 kW. Its immediate neighbours are the Valmet 8150 below it with 92 kW and the Valmet 8950-4 above it with 118 kW. Unladen weight across the Valmet/valtra range ranges from 3,650 to 5,220 kg; here the Valmet 8450 sits at the top of that range with 5,170 kg. 20 Valmet/valtra models across 3 series are on record.

Valmet/Valtra – other models: the collective page of Finnish tractors outside the named ranges, from the Valmet 800 through the 8000 series to the 6750-4 Hitech, 59 to 118 kW, four- to six-cylinder engines

This page gathers the tractors listed under Valmet and Valtra the register could not assign to a named range – from the Valmet 800 through the 8000 size classes (8150, 8400, 8450, 8950-4) to the 6750-4 Hitech and the later 6600E. Valmet, the Finnish tractor brand from Suolahti with state roots, built the first Finnish tractor in 1951 and was renamed Valtra in 1997 after Sisu came on board; since 2004 the brand has belonged to AGCO. The digit 4 after the type, as in the 6750-4 and 8950-4, marks four-wheel drive, Hitech the equipment with electronic control, E a later model stage.

Read on 3 more paragraphs

The register lists here 7 versions with 59 to 118 kW from four- to six-cylinders of 4,390 to 7,368 cm³, unladen weights from 3,650 to 5,220 kg, gross weights from 6,500 to 11,000 kg, lengths from 4,100 to 4,950 mm and widths from 2,110 to 2,470 mm.

Valmet and the later Valtra are market leaders in Finland and Scandinavia; the 8000 series was among the largest and most powerful Finnish-built tractors of the 1980s and 1990s and was widespread above all in forestry and large-scale farming.

Used, on these size classes operating hours, the condition of the engine and injection, the shuttle transmission and powershift steps, the four-wheel-drive clutch and hydraulics and rust on the cab and mudguards count; parts today run through Valtra and AGCO.

Sources: SpecCodex register, model data: Valmet/Valtra (weitere Modelle), Valtra (AGCO, Hersteller)

Technical data

Engine

Power103 kWcorrect
Cylinders6correct
Displacement6,598 cm³correct

Dimensions and weights

Length4,950 mmcorrect
Width2,390 mmcorrect
Unladen weight5,170 kgcorrect
Gross vehicle weight9,000 kgcorrect

Where this model stands

Power-to-weight ratio: 19.9 kW/t (103 kW / 5.2 t)

Power class: Large (100–180 hp)

Stronger than 81% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Valmet/valtra Valmet 8450 have?

The Valmet/valtra Valmet 8450 delivers 103 kW.

How much does the Valmet/valtra Valmet 8450 weigh?

The unladen weight is 5,170 kg.

What is the gross vehicle weight of the Valmet/valtra Valmet 8450?

9,000 kg.

What engine does the Valmet/valtra Valmet 8450 have?

6 cylinders, 6,598 cm³ displacement.

What are the dimensions of the Valmet/valtra Valmet 8450?

4,950 mm × 2,390 mm.

When was the Valmet/valtra Valmet 8450 built?

Production years: 2000.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare