Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Valmet/valtra › Other models › Valmet 800

Valmet/valtra 800

Built: 2001 · Series: Other models

More machines from model year 2001

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Valmet/valtra Valmet 800 is a machine built by Valmet/valtra. Production: 2001. The engine delivers 59 kW, has 4 cylinders, with a displacement of 4,400 cm³. The machine is 4,100 mm long and 2,110 mm wide. The unladen weight is 3,650 kg. The gross vehicle weight is 6,500 kg. The gearbox offers 8 gears. Rated output across the Valmet/valtra range ranges from 55.2 to 118 kW; the Valmet 800 sits at the bottom of that range with 59 kW. Its immediate neighbours are the 6100-4 below it with 58.1 kW and the 6300-4 above it with 62.5 kW. Unladen weight across the Valmet/valtra range ranges from 3,650 to 5,220 kg; here the Valmet 800 sits at the bottom of that range with 3,650 kg. 20 Valmet/valtra models across 3 series are on record.

Valmet/Valtra – other models: the collective page of Finnish tractors outside the named ranges, from the Valmet 800 through the 8000 series to the 6750-4 Hitech, 59 to 118 kW, four- to six-cylinder engines

This page gathers the tractors listed under Valmet and Valtra the register could not assign to a named range – from the Valmet 800 through the 8000 size classes (8150, 8400, 8450, 8950-4) to the 6750-4 Hitech and the later 6600E. Valmet, the Finnish tractor brand from Suolahti with state roots, built the first Finnish tractor in 1951 and was renamed Valtra in 1997 after Sisu came on board; since 2004 the brand has belonged to AGCO. The digit 4 after the type, as in the 6750-4 and 8950-4, marks four-wheel drive, Hitech the equipment with electronic control, E a later model stage.

Read on 3 more paragraphs

The register lists here 7 versions with 59 to 118 kW from four- to six-cylinders of 4,390 to 7,368 cm³, unladen weights from 3,650 to 5,220 kg, gross weights from 6,500 to 11,000 kg, lengths from 4,100 to 4,950 mm and widths from 2,110 to 2,470 mm.

Valmet and the later Valtra are market leaders in Finland and Scandinavia; the 8000 series was among the largest and most powerful Finnish-built tractors of the 1980s and 1990s and was widespread above all in forestry and large-scale farming.

Used, on these size classes operating hours, the condition of the engine and injection, the shuttle transmission and powershift steps, the four-wheel-drive clutch and hydraulics and rust on the cab and mudguards count; parts today run through Valtra and AGCO.

Sources: SpecCodex register, model data: Valmet/Valtra (weitere Modelle), Valtra (AGCO, Hersteller)

Technical data

Engine

Power59 kWcorrect
Cylinders4correct
Displacement4,400 cm³correct

Dimensions and weights

Length4,100 mmcorrect
Width2,110 mmcorrect
Unladen weight3,650 kgcorrect
Gross vehicle weight6,500 kgcorrect

Drivetrain and chassis

Gears8correct

Where this model stands

Power-to-weight ratio: 16.2 kW/t (59 kW / 3.6 t)

Power class: Universal (40–100 hp)

Stronger than 55% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Valmet/valtra Valmet 800 have?

The Valmet/valtra Valmet 800 delivers 59 kW.

How much does the Valmet/valtra Valmet 800 weigh?

The unladen weight is 3,650 kg.

What is the gross vehicle weight of the Valmet/valtra Valmet 800?

6,500 kg.

What engine does the Valmet/valtra Valmet 800 have?

4 cylinders, 4,400 cm³ displacement.

What are the dimensions of the Valmet/valtra Valmet 800?

4,100 mm × 2,110 mm.

When was the Valmet/valtra Valmet 800 built?

Production years: 2001.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare