Start › Tractors › Valmet › 665

Valmet 665

Built: 1992–1997 · Series: 65 er-Baureihe

More machines from model year 1992

Source: https://www.lectura-specs.com/en/model/agricultural-machiner

The Valmet 665 is a model in the 65er series. Production: 1992–1997. The engine delivers 80 hp (58.8 kW), has 4 cylinders, with a displacement of 4,397 cm³. Torque is 290 Nm. Rated speed is 2,350 rpm. The machine is 4,000 mm long, 2,030 mm wide and 2,570 mm high. The unladen weight is 3,280 kg. The wheelbase measures 2,390 mm. Ground clearance is 460 mm. Top speed is 30 km/h. The tank holds 73 litres. Transmission: 8 V/4 R and 12 V/8 R. The engine is water-cooled. Tyres: front 13.6 R 24 AS, rear 16.9 R 34 AS. The fuel is diesel. The bore measures 108 mm. The stroke is 120 mm. The compression ratio is 16.5:1. Maximum torque is reached at 1,450 rpm. Construction: unit construction (no separate frame). The linkage is category II. The PTO runs at 540/540E rpm. The 65 er-Baureihe series covers 5 models. Rated output within it ranges from 61 to 87 hp; the 665 sits in the upper part of that range with 80 hp. Its immediate neighbours are the 565 below it with 75 hp and the 865-2/865 above it with 87 hp. Unladen weight within it ranges from 2,820 to 3,280 kg; here the 665 sits at the top of that range with 3,280 kg. 414 Valmet models across 21 series are on record.

Valmet 65 series – Finnish farm tractors of the late 1970s and 1980s from Suolahti: 365 to 865, 45 to 64 kW, Sisu-Valmet engines

The Valmet 65 series from Finland followed the 55 series in the late 1970s and 1980s and bundles the three- and four-cylinder tractors 365 to 865. The -4 suffix marks four-wheel drive as in the 55 series; the engines came from the company's own plant and ran under the Sisu-Valmet name, as with the type 310 unit.

Read on 3 more paragraphs

The register lists here 5 versions with 44.9 to 64 kW or 52 to 80 hp from three- to four-cylinders of 3,298 to 4,397 cc, unladen weights from 2,820 to 3,280 kg, a lift capacity of 1,350 kg, lengths from 3,710 to 4,000 mm, widths from 2,030 to 2,040 mm and heights from 2,570 to 2,655 mm, torque from 220 to 310 Nm at a rated speed of 2,350 rpm.

Like the 55 series, the 65 series was built at the Suolahti plant for the Finnish and Scandinavian market; it covered a somewhat higher power class and came at the transition from the Valmet brand to the later renaming as Valtra. It thus closed the gap in the Valmet programme between the 55 series and the bigger ranges of the following years, sharing the same design philosophy and plant.

On the 65 series, what counts is the condition and compression of the Sisu-Valmet diesel, the condition of the four-wheel-drive clutch on the -4 models, the tightness of the hydraulics and lift, and rust on the cab and mudguards; parts today run through the successor network of Valtra.

Sources: SpecCodex register, model data: Valmet 65er-Baureihe, Valtra (Nachfolgemarke von Valmet, Hersteller)

Technical data

Engine

Fuel	dieselcorrect
Power	80 hp (58.8 kW)correct
Rated speed	2,350 rpmcorrect
Torque	290 Nmcorrect
Speed at max. torque	1,450 rpmcorrect
Cylinders	4correct
Displacement	4,397 cm³correct
Bore	108 mmcorrect
Stroke	120 mmcorrect
Compression ratio	16.5correct
Cooling	water-cooledcorrect

Dimensions and weights

Length	4,000 mmcorrect
Width	2,030 mmcorrect
Height	2,570 mmcorrect
Wheelbase	2,390 mmcorrect
Ground clearance	460 mmcorrect
Unladen weight	3,280 kgcorrect

Drivetrain and chassis

Drive	four-wheel drivecorrect
Gearbox	8 V/4 R and 12 V/8 Rcorrect
Front tyres	13.6 R 24 AScorrect
Rear tyres	16.9 R 34 AScorrect
Top speed	30 km/hcorrect

Working data

Fuel tank capacity	73 lcorrect

Origin and approval

Construction	unit construction (no separate frame)correct

Other data

Linkage category	Cat IIcorrect
PTO speed	540/540E rpmcorrect

Where this model stands

Power-to-weight ratio: 17.9 kW/t (59 kW / 3.3 t)

Power class: Universal (40–100 hp)

Stronger than 54% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Valmet 665 have?

The Valmet 665 delivers 80 hp.

How much does the Valmet 665 weigh?

The unladen weight is 3,280 kg.

What engine does the Valmet 665 have?

4 cylinders, 4,397 cm³ displacement, Diesel.

How fast does the Valmet 665 go?

Top speed is 30 km/h.

What are the dimensions of the Valmet 665?

4,000 mm × 2,030 mm × 2,570 mm.

When was the Valmet 665 built?

Production years: 1992–1997.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Check the weights in the papers against the figures here — attachments change them.
Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
Shift the gearbox cold and warm — jumps only show up at temperature.
Load the hydraulics and watch for sag.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 28 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →