Valmet 604 / 604-4
Built: 1982–1985 · Series: 04 er-Baureihe
More machines from model year 1982
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Valmet 04 range: collective page of Finnish tractors 504 and 604 (also as Turbo) from Suolahti, three-cylinder diesels, 37 to 49 kW, 1980s
The 04 range from Valmet, dating from the 1980s, comprises the models 504 and 604 in the register, the latter also available in a turbocharged Turbo version; they were built at the Finnish plant in Suolahti. The model numbers rank the range by power class, and the -4 suffix denotes the four-wheel-drive variant. With the optional turbocharging on the 604, the range relied on comparatively modern technology for its time. That extra output made a real difference when pulling heavier implements.
Read on 3 more paragraphs
The register lists 3 versions with 36.8 to 48.5 kW from three-cylinder diesel engines of 2,685 to 3,298 cm³, unladen weights of 2,690 to 2,820 kg, a length of 3,617 mm, widths of 1,890 to 1,930 mm and heights of 2,500 to 2,554 mm; torque ranges from 170 to 235 Nm at a rated speed of 2,300 rpm.
Turbocharging the more powerful 604 was, for a Finnish tractor of the period, an early step toward more power from relatively small displacement, helping it keep pace with rivals' larger six-cylinder models; the 04 range covered the mid power segment on Nordic farms.
When buying used, on the Turbo version particularly the condition of the turbocharger and charge-air ducting matters, and on all models the injection pump, cooling, gearbox and clutch; spare parts are available through today's Valtra network and independent farm-machinery dealers.
Sources: SpecCodex register, model data: Valmet 04er
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 61 hp (44.9 kW)correct |
| Rated speed | 2,300 rpmcorrect |
| Torque | 220 Nmcorrect |
| Speed at max. torque | 1,300 rpmcorrect |
| Cylinders | 3correct |
| Displacement | 3,298 cm³correct |
| Bore | 108 mmcorrect |
| Stroke | 120 mmcorrect |
| Compression ratio | 17correct |
| Injection pressure | 201 barcorrect |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 3,617 mmcorrect |
|---|---|
| Width | 1,930 mmcorrect |
| Height | 2,545 mmcorrect |
| Wheelbase | 2,112 mmcorrect |
| Ground clearance | 470 mmcorrect |
| Unladen weight | 2,800 kgcorrect |
Drivetrain and chassis
| Drive | rear-wheel drivecorrect |
|---|---|
| Gearbox | 6 V/2 Rcorrect |
| Front tyres | 10.00-16 ASF (A: 11.2-24 AS)correct |
| Rear tyres | 13.6-36 AScorrect |
| Top speed | 30 km/hcorrect |
Origin and approval
| Construction | frame constructioncorrect |
|---|
Where this model stands
Power-to-weight ratio: 16 kW/t (45 kW / 2.8 t)
Power class: Universal (40–100 hp)
Stronger than 42% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Valmet 604 / 604-4 have?
The Valmet 604 / 604-4 delivers 61 hp.
How much does the Valmet 604 / 604-4 weigh?
The unladen weight is 2,800 kg.
What engine does the Valmet 604 / 604-4 have?
3 cylinders, 3,298 cm³ displacement, Diesel.
How fast does the Valmet 604 / 604-4 go?
Top speed is 30 km/h.
What are the dimensions of the Valmet 604 / 604-4?
3,617 mm × 1,930 mm × 2,545 mm.
When was the Valmet 604 / 604-4 built?
Production years: 1982–1985.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 25 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.