Valmet 504
Built: 1982–1985 · Series: 04 er-Baureihe
More machines from model year 1982
Valmet 04 range: collective page of Finnish tractors 504 and 604 (also as Turbo) from Suolahti, three-cylinder diesels, 37 to 49 kW, 1980s
The 04 range from Valmet, dating from the 1980s, comprises the models 504 and 604 in the register, the latter also available in a turbocharged Turbo version; they were built at the Finnish plant in Suolahti. The model numbers rank the range by power class, and the -4 suffix denotes the four-wheel-drive variant. With the optional turbocharging on the 604, the range relied on comparatively modern technology for its time. That extra output made a real difference when pulling heavier implements.
Read on 3 more paragraphs
The register lists 3 versions with 36.8 to 48.5 kW from three-cylinder diesel engines of 2,685 to 3,298 cm³, unladen weights of 2,690 to 2,820 kg, a length of 3,617 mm, widths of 1,890 to 1,930 mm and heights of 2,500 to 2,554 mm; torque ranges from 170 to 235 Nm at a rated speed of 2,300 rpm.
Turbocharging the more powerful 604 was, for a Finnish tractor of the period, an early step toward more power from relatively small displacement, helping it keep pace with rivals' larger six-cylinder models; the 04 range covered the mid power segment on Nordic farms.
When buying used, on the Turbo version particularly the condition of the turbocharger and charge-air ducting matters, and on all models the injection pump, cooling, gearbox and clutch; spare parts are available through today's Valtra network and independent farm-machinery dealers.
Sources: SpecCodex register, model data: Valmet 04er
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 50 hp (36.8 kW)correct |
| Rated speed | 2,300 rpmcorrect |
| Torque | 170 Nmcorrect |
| Speed at max. torque | 1,300 rpmcorrect |
| Cylinders | 3correct |
| Displacement | 2,685 cm³correct |
| Bore | 108 mmcorrect |
| Stroke | 114 mmcorrect |
| Compression ratio | 17correct |
| Injection pressure | 201 barcorrect |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 3,617 mmcorrect |
|---|---|
| Width | 1,890 mmcorrect |
| Height | 2,500 mmcorrect |
| Wheelbase | 2,112 mmcorrect |
| Ground clearance | 400 mmcorrect |
| Unladen weight | 2,690 kgcorrect |
Drivetrain and chassis
| Drive | rear-wheel drivecorrect |
|---|---|
| Gearbox | 6 V/2 Rcorrect |
| Forward gears | 6correct |
| Reverse gears | 2correct |
| Front tyres | 7.50-16 ASFcorrect |
| Rear tyres | 14.9-30 AScorrect |
| Top speed | 30 km/hcorrect |
Working data
| Fuel tank capacity | 65 lcorrect |
|---|
Origin and approval
| Construction | frame constructioncorrect |
|---|
Other data
| Linkage category | Cat IIcorrect |
|---|
Where this model stands
Power-to-weight ratio: 13.7 kW/t (37 kW / 2.7 t)
Power class: Universal (40–100 hp)
Stronger than 34% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Valmet 504 have?
The Valmet 504 delivers 50 hp.
How much does the Valmet 504 weigh?
The unladen weight is 2,690 kg.
What engine does the Valmet 504 have?
3 cylinders, 2,685 cm³ displacement, Diesel.
How fast does the Valmet 504 go?
Top speed is 30 km/h.
What are the dimensions of the Valmet 504?
3,617 mm × 1,890 mm × 2,500 mm.
When was the Valmet 504 built?
Production years: 1982–1985.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 30 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.