TYM T500
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The TYM T500 is a tractor made by TYM. It is powered by a four-cylinder engine producing 37 kW.
It combines a Constant mesh gearbox with MFWD.
It runs on diesel; the engine is water-cooled. Within the range, rated power spans from 17 to 97 kW; with 37 kW, the T500 sits in the mid-field. Directly alongside are the Tong Yang T480 with 36 kW below and the T503 with 38 kW above.
Technical data
Engine
| Engine make | Perkinscorrect |
|---|---|
| Engine model | 404D-22correct |
| Fuel | dieselcorrect |
| Power | 50 hp (37 kW)correct |
| Cylinders | 4correct |
| Displacement | 2,216 cccorrect |
| Cooling | water-cooledcorrect |
Drivetrain and chassis
| Drive | selectable four-wheel drivecorrect |
|---|---|
| Gearbox | constant-mesh gearboxcorrect |
| Forward gears | 9correct |
| Reverse gears | 3correct |
| Clutch | ry single platecorrect |
Origin and approval
| Plant | South Koreacorrect |
|---|
Frequently asked questions
How much power does the TYM T500 have?
The TYM T500 delivers 50 hp.
What engine does the TYM T500 have?
4 cylinders, Diesel.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.