StartTractorsTYM › T503

TYM T503

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The TYM T503 is a tractor from TYM. The four-cylinder engine produces 38 kW.

Power is transmitted through a Shuttle gearbox, drive type: MFWD.

It runs on diesel; the engine is water-cooled. Within the range, rated power spans from 17 to 97 kW; with 38 kW, the T503 sits in the mid-field. Directly alongside are the Tong Yang T502 with 37 kW below and the T550 with 41 kW above.

Technical data

Engine

Engine makeCaterpillar; Perkinscorrect
Engine modelC2.2; 404D-22correct
Fueldieselcorrect
Power51 hp (38 kW)correct
Cylinders4correct
Displacement2,216correct
Coolingwater-cooledcorrect

Drivetrain and chassis

Driveselectable four-wheel drivecorrect
GearboxShuttlecorrect
Forward gears16correct
Reverse gears16correct
ClutchDry single platecorrect

Origin and approval

PlantSouth Koreacorrect
VersionT503SHcorrect

Frequently asked questions

How much power does the TYM T503 have?

The TYM T503 delivers 51 hp.

What engine does the TYM T503 have?

4 cylinders, Diesel.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 17 individual figures for this model. They come from 3 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2] [3]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare