Turbos Hoet OPS/3AT/39
Built: 2005 · Series: OPS 3AT
More machines from model year 2005
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Turbo's Hoet OPS/3AT – Belgian semi-trailer: kerb weight 4,600 to 8,340 kg, gross weight 39,000 kg, length 13,280 to 13,950 mm, width up to 2,550 mm
Turbo's Hoet is a commercial-vehicle builder from Hooglede in Belgium; the OPS/3AT range in the register comprises semi-trailers. The designations OPS/3AT, OPS/3AT/39, OPS/3AT/39 03BRSM, OPS/3AT/39/03BSRM and OPS/3AT39/03BSRM differ only in suffixes to the base designation; as semi-trailers these vehicles do not stand freely but couple to a tractor unit via a fifth wheel, which carries part of the total weight.
Read on 3 more paragraphs
The register lists here 5 versions with kerb weights from 4,600 to 8,340 kg at a gross weight of 39,000 kg, lengths from 13,280 to 13,950 mm and widths from 2,500 to 2,550 mm.
The 39,000 kg corresponds to the gross weight permitted in Belgium and much of the EU for a tractor-and-semi-trailer combination; the comparatively low kerb weight of the trailer against the gross weight arises because the tractor unit takes on a substantial share of the load via the fifth wheel. Such semi-trailers are used in European long-haul transport for general and palletised cargo and compete with semi-trailers from other Belgian, Dutch and German manufacturers.
On a used semi-trailer of this type, what counts is the condition of the fifth-wheel plate and kingpin, the tightness and load capacity of the body, the function of the air brake system including the connections to the tractor unit, the condition of the axles and any lift axle, and corrosion on the frame and chassis rails; tyre wear and the inspection sticker give further insight into maintenance condition. Spare parts run through the Belgian commercial-vehicle trade and in part directly through Turbo's Hoet.
Sources: SpecCodex register, model data: Turbo's Hoet OPS/3AT
Technical data
Dimensions and weights
| Length | 13,280 mmcorrect |
|---|---|
| Width | 2,500 mmcorrect |
| Wheelbase | 9,060 mmcorrect |
| Unladen weight | 4,600 kgcorrect |
| Gross vehicle weight | 39,000 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Turbos Hoet OPS/3AT/39 weigh?
The unladen weight is 4,600 kg.
What is the gross vehicle weight of the Turbos Hoet OPS/3AT/39?
39,000 kg.
Up to what speed is the Turbos Hoet OPS/3AT/39 approved?
Approved up to 100 km/h.
What are the dimensions of the Turbos Hoet OPS/3AT/39?
13,280 mm × 2,500 mm.
When was the Turbos Hoet OPS/3AT/39 built?
Production years: 2005.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
