Technical register for agricultural, construction and commercial machinery · sourced data

Sumitomo SH480LHD-5

Series: Sumitomo Hydraulic Excavator

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Sumitomo Hydraulic Excavator series from Sumitomo includes the SH480LHD-5. The engine delivers 367.1 hp (270 kW), has 6 cylinders, with a displacement of 9,840.4 cm³. Rated speed is 1,950 rpm. The unladen weight is 46,700 kg. Ground clearance is 542.5 mm. The pump delivers 720.4 l/min. Working pressure is 363 bar. The engine fitted is the AH-6UZ1XYSS. The Sumitomo Hydraulic Excavator series covers 40 models. Rated output within it ranges from 96.4 to 539.8 hp; the SH480LHD-5 sits in the upper part of that range with 367.1 hp. Its immediate neighbours are the SH450HD-3 below it with 320.1 hp and the SH800LHD-3 above it with 450.1 hp. Unladen weight within it ranges from 12,500 to 80,100 kg; here the SH480LHD-5 sits in the middle of that range with 46,700 kg. 62 Sumitomo models across 6 series are on record.

Sumitomo Hydraulic Excavator SH100 to SH870: reading the SH number and the dash generation, 60 to 397 kW, 11.5 to 80.1 t operating weight, the dash level sets the emissions tier

The "Sumitomo Hydraulic Excavator" bucket on SpecCodex covers 40 live-listed models from the Japanese crawler-excavator family. The code follows a clear pattern: "SH" plus a number (100, 120, 130, 160, 200, 220…) names the size class, while a hyphenated digit such as "-2", "-3" or "-5" marks the production generation, referred to by the maker as the "dash" level.

Read on 4 more paragraphs

Each new dash generation at Sumitomo lines up with a new emissions tier: older dash levels met EU Stage IIIA or EPA Tier III, while current lines (dash-6/-7) reach EPA Tier 4 Final and EU Stage V with a diesel particulate filter and SCR aftertreatment. Models without a dash digit, such as the plain SH200 in this bucket, are usually older or export-market versions outside that scheme.

The recorded spread: engine output 60 to 397 kW, operating weight 11,480 to 80,100 kg, displacement 2,900 to 15,700 cm³. For a subset of models, 4- to 6-cylinder engines and torque figures of 294 to 539 Nm are also on file.

For a used machine, the dash generation drives the service checklist: newer dash generations with DPF/SCR need their regeneration cycles and AdBlue system checked, while older dash-2/3 machines call for a closer look at the hydraulic pump, valve block, and undercarriage for leaks and wear.

In short: the SH number is the size class, the dash digit is the generation and, indirectly, the emissions tier. Only the nameplate confirms it — the model name alone does not.

Sources: SpecCodex register, model data: Sumitomo Hydraulic Excavator, — Sumitomo SH330-5/SH350-5 Datenblatt, — Sumitomo SH145X-6 Datenblatt (Tier 4), — KHL Group: The latest excavator generation

Technical data

Engine

Engine modelAH-6UZ1XYSScorrect
Power367.1 hp (270 kW)correct
Rated speed1,950 rpmcorrect
Cylinders6correct
Displacement9,840.4 cm³correct

Dimensions and weights

Ground clearance542.5 mmcorrect
Unladen weight46,700 kgcorrect

Working data

Pump flow720.4 l/mincorrect
Hydraulic pressure363 barcorrect

Where this model stands

Power-to-weight ratio: 5.8 kW/t (270 kW / 46.7 t)

Stronger than 90% of the excavators & compaction in the register — out of 1,650 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Sumitomo SH480LHD-5 have?

The Sumitomo SH480LHD-5 delivers 367 hp.

How much does the Sumitomo SH480LHD-5 weigh?

The unladen weight is 46,700 kg.

What engine does the Sumitomo SH480LHD-5 have?

6 cylinders, 9,840 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: RitchieSpecs equipment specifications (retrieved August 2026) · How we check the data

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare