Start › Excavators & compaction › Sumitomo › SH200-3

Sumitomo SH200-3

Series: Sumitomo Hydraulic Excavator

Source: https://commons.wikimedia.org/wiki/File:Excavator,_SH200,_Su

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the SH200-3, Sumitomo offers a model from the Sumitomo Hydraulic Excavator series. The engine delivers 104.4 kW, with a displacement of 6,494.2 cm³. Rated speed is 1,950 rpm. The unladen weight is 19,100 kg. Ground clearance is 460.2 mm. The tank holds 340.3 litres. The hydraulic tank holds 206.3 litres. Working pressure is 343 bar. The engine fitted is the BB-6BG1T. The Sumitomo Hydraulic Excavator series covers 40 models. Rated output within it ranges from 60 to 397 kW; the SH200-3 sits at the bottom of that range with 104.4 kW. Its immediate neighbours are the SH225X-3 below it with 103.1 kW and the SH220-2 above it with 114.1 kW. 49 Sumitomo models across 5 series are on record. The model is listed under Excavators & compaction. 10 verified figures from 1 source are on file.

Technical data

Engine

Engine modelBB-6BG1Tcorrect
Power104.4 kWcorrect
Rated speed1,950 rpmcorrect
Displacement6,494.2 cm³correct

Dimensions and weights

Ground clearance460.2correct
Unladen weight19,100 kgcorrect

Working data

Hydraulic oil capacity206.3 lcorrect
Hydraulic pressure343 barcorrect
Fuel tank capacity340.3 lcorrect

Other data

Height2,880.4correct

Where this model stands

Power-to-weight ratio: 5.5 kW/t (104 kW / 19.1 t)

Stronger than 44% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Sumitomo SH200-3 have?

The Sumitomo SH200-3 delivers 104 kW.

How much does the Sumitomo SH200-3 weigh?

The unladen weight is 19,100 kg.

What engine does the Sumitomo SH200-3 have?

6,494 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

SH100-2

SH120-2

SH120-3

SH125X-3

SH130-5

SH135X-3

SH135XU-3B

SH160-5

SH200

SH200-2

SH200HD-3

SH200LC

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare