Start › Excavators & compaction › Sumitomo › SH200LC

Sumitomo SH200LC

Series: Sumitomo Hydraulic Excavator

The photo shows the SH330-5 from the same series. Source: https://www.lectura-specs.com/en/model/construction-machiner

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the SH200LC, Sumitomo offers a model from the Sumitomo Hydraulic Excavator series. The engine delivers 95.4 kW, with a displacement of 5,781.4 cm³. Rated speed is 2,020 rpm. The unladen weight is 19,490 kg. Ground clearance is 460.2 mm. The tank holds 310 litres. The hydraulic tank holds 220.3 litres. Working pressure is 313.7 bar. The engine fitted is the 6BD1T. The Sumitomo Hydraulic Excavator series covers 40 models. Rated output within it ranges from 60 to 397 kW; the SH200LC sits at the bottom of that range with 95.4 kW. Its immediate neighbours are the SH160-5 below it with 89.3 kW and the SH200-2 above it with 97.7 kW. 49 Sumitomo models across 5 series are on record. The model is listed under Excavators & compaction. 10 verified figures from 1 source are on file.

Technical data

Engine

Engine model6BD1Tcorrect
Power95.4 kWcorrect
Rated speed2,020 rpmcorrect
Displacement5,781.4 cm³correct

Dimensions and weights

Ground clearance460.2correct
Unladen weight19,490 kgcorrect

Working data

Hydraulic oil capacity220.3 lcorrect
Hydraulic pressure313.7 barcorrect
Fuel tank capacity310 lcorrect

Other data

Height2,862.1correct

Where this model stands

Power-to-weight ratio: 4.9 kW/t (95 kW / 19.5 t)

Stronger than 39% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Sumitomo SH200LC have?

The Sumitomo SH200LC delivers 95.4 kW.

How much does the Sumitomo SH200LC weigh?

The unladen weight is 19,490 kg.

What engine does the Sumitomo SH200LC have?

5,781 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

SH100-2

SH120-2

SH120-3

SH125X-3

SH130-5

SH135X-3

SH135XU-3B

SH160-5

SH200

SH200-2

SH200-3

SH200HD-3

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare