Technical register for agricultural, construction and commercial machinery · sourced data
Start › Vans › Studebaker › EC-2-PICK UP/3130

Studebaker EC-2-PICK UP/3130

Built: 1955-1955 · Series: Other models

More machines from model year 1955

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The EC-2-PICK UP/3130 comes from Studebaker. Production: 1955. The engine delivers 88 kW, has 8 cylinders, with a displacement of 4,240 cm³. The machine is 5,200 mm long and 1,940 mm wide. The unladen weight is 1,650 kg. Rated output across the Studebaker range ranges from 63.3 to 125 kW; the EC-2-PICK UP/3130 sits in the middle of that range with 88 kW. Its immediate neighbours are the Muut erikoiskäyttöön tarkoitetut ajoneuvot (SG) 2ov 4031cm3 below it with 75 kW and the TRANSTAR3E7-22/3100 above it with 125 kW. Unladen weight across the Studebaker range ranges from 1,650 to 4,480 kg; here the EC-2-PICK UP/3130 sits at the bottom of that range with 1,650 kg. 33 Studebaker models across 3 series are on record.

Studebaker – other commercial vehicles: from the M-series pickups of the 1940s through the 2R and 3E ranges and the Transtar to the Champ, six- and eight-cylinder engines of 2.0 to 5.0 litres, 88 to 125 kW

This page gathers the pickup and light commercial ranges of Studebaker that the register could not assign to a named range – from the M-series pickup of the 1940s (M5 as a half-ton, M15 as a three-quarter-ton and M16 as a one-ton) through the successor 2R (1949 to 1953) and 3E (1954/55) ranges to the pickup marketed as the Transtar from 1956 and the Champ, introduced in 1960 on the Lark passenger-car platform. Studebaker, founded in 1852 as a wagon builder in South Bend, Indiana, built vehicles from 1902 and finally ended all vehicle production in 1966; the Champ was thus the brand's last pickup range.

Read on 3 more paragraphs

The register lists here 21 versions with 88 to 125 kW from six- and eight-cylinders of 2,000 to 4,970 cm³, unladen weights from 1,290 to 2,537 kg, gross weights from 1,530 to 3,500 kg, lengths from 5,100 to 5,200 mm and widths from 1,770 to 2,170 mm.

Studebaker's pickups competed in the US against Ford, Chevrolet and Dodge but always remained the smaller brand with lower volumes; the vehicles reached Europe mostly as imports and are today traded chiefly as collector pieces of American post-war history.

On a used example from these model years, rust on the frame, wings and load bed, the condition of the carburettor and ignition system, oil leaks from engine and gearbox on the eight-cylinders, and the function of the mechanical brakes count; spare parts are scarce given the low production volumes and run almost exclusively through specialist US parts dealers and clubs.

Sources: Kennwerte der Modelle Studebaker (weitere Modelle)

Technical data

Engine

Power88 kWcorrect
Cylinders8correct
Displacement4,240 cm³correct

Dimensions and weights

Length5,200 mmcorrect
Width1,940 mmcorrect
Unladen weight1,650 kgcorrect

Where this model stands

Power-to-weight ratio: 53.3 kW/t (88 kW / 1.6 t)

Stronger than 53% of the vans in the register — out of 7,144 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Studebaker EC-2-PICK UP/3130 have?

The Studebaker EC-2-PICK UP/3130 delivers 88 kW.

How much does the Studebaker EC-2-PICK UP/3130 weigh?

The unladen weight is 1,650 kg.

What engine does the Studebaker EC-2-PICK UP/3130 have?

8 cylinders, 4,240 cm³ displacement.

What are the dimensions of the Studebaker EC-2-PICK UP/3130?

5,200 mm × 1,940 mm.

When was the Studebaker EC-2-PICK UP/3130 built?

Production years: 1955.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Van in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare