Steyr (SLT) 955 (a)
Built: 1992–1997 · Series: 900er-Baureihe
More machines from model year 1992
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Steyr (SLT) 900 series – the three-cylinder tractors of the 1990s: 942 a to 970 a, 31 to 52 kW from 2.4 to 3.1-litre engines
The 900 range of Steyr Landmaschinentechnik (SLT) covers the smaller to mid-size three-cylinder tractors of the 1990s. The type designations 942 a to 970 a give the power class in the first digits; the suffix a marks the model variant.
Read on 3 more paragraphs
The register lists here 5 versions with 30.9 to 51.5 kW from three-cylinders of 2,356 to 3,117 cc, unladen weights from 2,310 to 3,060 kg, lengths from 3,290 to 3,805 mm, widths from 1,740 to 2,070 mm, heights from 2,260 to 2,425 mm and a torque of 209 Nm at rated speeds of 2,300 to 2,400 rpm. The engines run on either diesel or RME.
The 900 range covered the lower to mid class in the Steyr programme of the 1990s for smaller and medium farms in Austria and the alpine countries, as the base below the brand's bigger six-cylinder ranges. It thus rounded out the programme with an economical three-cylinder alternative to the bigger Steyr ranges.
On the 900 range, what counts is operating hours, the condition of the three-cylinder diesel, clutch and gearbox, the tightness of the hydraulics, and rust on the cab and mudguards on these now-older machines; parts run through the CNH and Steyr network, on older model years partly only second-hand, as well as the working order of the lighting and the condition of the clutch disc on these machines often run in daily use.
Sources: SpecCodex register, model data: Steyr (SLT) 900er-Baureihe, Steyr (CNH, Hersteller)
Technical data
Engine
| Fuel | Diesel/RMEcorrect |
|---|---|
| Power | 55 hp (40.5 kW)correct |
| Rated speed | 2,300 rpmcorrect |
| Torque | 209 Nmcorrect |
| Cylinders | 3correct |
| Displacement | 3,117 cm³correct |
| Bore | 105 mmcorrect |
| Stroke | 120 mmcorrect |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 3,665 mmcorrect |
|---|---|
| Width | 2,055 mmcorrect |
| Height | 2,400 mmcorrect |
| Wheelbase | 2,209 mmcorrect |
| Ground clearance | 450 mmcorrect |
| Unladen weight | 2,745 kgcorrect |
Drivetrain and chassis
| Drive | rear- or four-wheel drivecorrect |
|---|---|
| Gearbox | 16V/8R and 16V/16Rcorrect |
| Front tyres | 7.50-18 ASF (A: 12.5-20 MPT)correct |
| Rear tyres | 16.9-30 AScorrect |
| Top speed | 30 km/hcorrect |
Origin and approval
| Construction | unit construction (no separate frame)correct |
|---|
Where this model stands
Power-to-weight ratio: 14.8 kW/t (40 kW / 2.7 t)
Power class: Universal (40–100 hp)
Stronger than 38% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Steyr (SLT) 955 (a) have?
The Steyr (SLT) 955 (a) delivers 55 hp.
How much does the Steyr (SLT) 955 (a) weigh?
The unladen weight is 2,745 kg.
What engine does the Steyr (SLT) 955 (a) have?
3 cylinders, 3,117 cm³ displacement, Diesel/RME.
How fast does the Steyr (SLT) 955 (a) go?
Top speed is 30 km/h.
What are the dimensions of the Steyr (SLT) 955 (a)?
3,665 mm × 2,055 mm × 2,400 mm.
When was the Steyr (SLT) 955 (a) built?
Production years: 1992–1997.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 22 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.