Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Steyr › Other models › 4110 Profi

Steyr 4110 Profi (82 kW)

Built: 2007–2011 · Series: Other models

More machines from model year 2007

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Pozostałe modele series from Steyr includes the 4110 Profi. Production: 2007–2011. The engine delivers 110 hp (82 kW), has 4 cylinders, with a displacement of 4,485 cm³. Rated speed is 2,200 rpm. The machine is 4,290 mm long, 1,780 mm wide and 2,880 mm high. The unladen weight is 4,820 kg. Top speed is 50 km/h. The engine is water-cooled. Tyres: front 440/65 R 28, rear 540/65 R 38. The fuel is diesel. Rated output across the Steyr range ranges from 13 to 265 hp; the 4110 Profi sits in the lower part of that range with 110 hp. Its immediate neighbours are the Multi 4110 below it with 107 hp and the 1200 (a) above it with 115 hp. Unladen weight across the Steyr range ranges from 1,210 to 10,500 kg; here the 4110 Profi sits in the lower part of that range with 4,820 kg. 137 Steyr models across 20 series are on record.

Steyr – other models: collective page of Austrian tractors outside the named ranges, from Kompakt through Profi to CVT and the large MT models, 22 to 146.2 kW

This page gathers the Steyr tractors the register could not assign to a named range, from small Kompakt models through the Profi range to the stepless CVT large tractors and the large MT models. Steyr builds its tractors at the St. Valentin plant in Upper Austria; the brand has belonged to CNH Industrial since the merger with Case IH in 1996 and has since shared platforms and engines with Case IH. The naming logic is clearly tiered: Kompakt denotes small yard tractors, Profi the mid-range, CVT the large tractors with stepless transmission.

Read on 3 more paragraphs

The register lists here 21 versions with 22 to 146.2 kW from two- to six-cylinder engines of 2,660 to 6,728.5 cm³, unladen weights of 1,800 to 6,650 kg, lengths of 2,630 to 4,790 mm, widths of 1,580 to 2,550 mm and heights of 2,400 to 2,920 mm; torque ranges from 216 to 632 Nm at rated speeds of 2,100 to 2,300 rpm, all with diesel engines.

Steyr positions itself as a premium brand for the Central European and alpine market, with a focus on hill farming and municipal uses where manoeuvrability and four-wheel drive are particularly in demand; main competitors are sister brand Case IH along with Fendt and John Deere.

When buying used, on the CVT models the transmission electronics and cooling matter, on the Kompakt and Profi the clutch, brakes and hydraulic pump; rust on the cab frame and mudguards is common on older models. Parts run through the shared Case IH and Steyr network.

Sources: SpecCodex register, model data: Steyr (weitere Modelle), Steyr Traktoren (manufacturer)

Technical data

Engine

Fueldieselcorrect
Power110 hp (82 kW)correct
Rated speed2,200 rpmcorrect
Cylinders4correct
Displacement4,485 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length4,290 mmcorrect
Width1,780 mmcorrect
Height2,880 mmcorrect
Unladen weight4,820 kgcorrect

Drivetrain and chassis

Drivefour-wheel drivecorrect
Front tyres440/65 R 28correct
Rear tyres540/65 R 38correct
Top speed50 km/hcorrect

Where this model stands

Power-to-weight ratio: 17 kW/t (82 kW / 4.8 t)

Power class: Large (100–180 hp)

Stronger than 71% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Steyr 4110 Profi have?

The Steyr 4110 Profi delivers 110 hp.

How much does the Steyr 4110 Profi weigh?

The unladen weight is 4,820 kg.

What engine does the Steyr 4110 Profi have?

4 cylinders, 4,485 cm³ displacement, Diesel.

How fast does the Steyr 4110 Profi go?

Top speed is 50 km/h.

What are the dimensions of the Steyr 4110 Profi?

4,290 mm × 1,780 mm × 2,880 mm.

When was the Steyr 4110 Profi built?

Production years: 2007–2011.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare