StartTractorsSteyr › 6140 Profi

Steyr 6140 Profi 4WD

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

As a tractor, the Steyr 6140 Profi belongs to the Steyr 4WD Tractor series. Under the bonnet works a six-cylinder engine displacing 6.7 litres, producing 154 hp (105.1 kW).

Top speed is 50 km/h.

Within the range, rated power spans from 87.2 to 154 hp; with 154 hp, the 6140 Profi sits at the top. Below it ranks the 4130 Profi with 144 hp.

Technical data

Engine

Power154.1 hp (105.1 kW)correct
Cylinders6correct
Displacement6,728.5 cm³correct
AspirationTurbocharged, intercooledcorrect

Drivetrain and chassis

Gearbox typeSTEYR Power-8correct
Tyre sizeFront 14.9 R28, Rear 18.4 PR38correct
Top speed50.1 km/hcorrect

Working data

Pump flow113.2 l/mincorrect
Hydraulic pressure210correct
Fuel tank capacity250.2 lcorrect

Other data

Height2,923correct

Frequently asked questions

How much power does the Steyr 6140 Profi have?

The Steyr 6140 Profi delivers 154 hp.

What engine does the Steyr 6140 Profi have?

6 cylinders, 6,728 cm³ displacement.

How fast does the Steyr 6140 Profi go?

Top speed is 50.1 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare