StartTractorsSteyr › 9095 MT

Steyr 9095 MT 4WD

Series: Pozostałe modele

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

As a tractor, the Steyr 9095 MT belongs to the Steyr 4WD Tractor series. 94 hp (69 kW) is what the four-cylinder engine gets out of 4.4 litres. Rated power arrives at 2,300 rpm — the engine pulls from low down rather than needing to be revved.

Within the range, rated power spans from 87.2 to 154 hp; with 94.3 hp, the 9095 MT sits at the bottom end. Directly alongside are the 9085 MT with 87.2 hp below and the 9105 MT with 103 hp above.

Technical data

Engine

Power94.3 hp (69 kW)correct
Rated speed2,300 rpmcorrect
Cylinders4correct
Displacement4,398.3 cm³correct
AspirationTurbocharged, intercooledcorrect

Drivetrain and chassis

Gearbox typeSTEYR Power-2correct
Forward gears16correct
Reverse gears8correct
Tyre sizeFront 14.9 R24, Rear 18.4 R34correct

Working data

Pump flow50.3 l/mincorrect
Hydraulic pressure175correct

Other data

Height2,731correct

Frequently asked questions

How much power does the Steyr 9095 MT have?

The Steyr 9095 MT delivers 94.3 hp.

What engine does the Steyr 9095 MT have?

4 cylinders, 4,398 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare