Steyr Kompakt 4075 ecotech
Built: 2013 · Series: Kompakt-Baureihe
More machines from model year 2013
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Steyr Kompakt series – compact tractors 360, 370, 375 and Kompakt 4075 ecotech from the CNH era, three- and four-cylinder diesels from 43 to 56 kW, some approved for rapeseed-oil-methyl-ester operation
The Kompakt series emerged after Steyr merged with Case IH and New Holland in 1996 to form today's CNH group; the 360, 370 and 375 Kompakt types and the later Kompakt 4075 ecotech reflect the ongoing development of this smaller Steyr line over several years. The three-digit types order the power class in ascending order, while the 4075 ecotech, with its four-digit designation and ecotech suffix, denotes a later, emissions-optimised generation. Within the CNH group, Steyr shares platforms and components with Case IH and New Holland while remaining a distinctly positioned brand.
Read on 3 more paragraphs
The register lists four versions here with 43.4 to 55.9 kW from three- and four-cylinder diesel engines with 2,931 to 3,400 cm³ displacement. Rated speed is 2,300 rpm, unladen weight ranges from 2,850 to 3,900 kg with lengths from 3,440 to 4,241 mm, widths from 1,923 to 2,300 mm and heights from 2,410 to 2,494 mm; lift capacity at the linkage reaches up to 4,400 kg. Some of the engines are approved to run on diesel or rapeseed oil methyl ester.
As compact all-round tractors, the series targeted smaller farms, municipalities and contractors needing manoeuvrability and a low centre of gravity for yard and grassland work, competing there with comparable compact classes from New Holland and Case IH.
When buying used, check the condition of the front-loader mounting and hydraulic couplings, the tightness of the lift cylinders, wear on the clutch and shuttle gearbox, and on the biodiesel-capable engines the condition of the injection system and fuel filters. Parts run through the CNH dealer network for Steyr, Case IH and New Holland.
Sources: SpecCodex register, model data: Steyr Kompakt-Baureihe, Steyr (CNH Industrial, Hersteller)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 75 hp (55 kW)correct |
| Rated speed | 2,300 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 3,400 cm³correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 4,241 mmcorrect |
|---|---|
| Width | 1,923 mmcorrect |
| Height | 2,494 mmcorrect |
| Wheelbase | 2,235 mmcorrect |
| Unladen weight | 3,900 kgcorrect |
Drivetrain and chassis
| Drive | four-wheel drivecorrect |
|---|---|
| Gearbox | 12x12, 24x24correct |
| Front tyres | 14.9LR20correct |
| Rear tyres | 420/85R30correct |
| Top speed | 40 km/hcorrect |
Working data
| Lifting capacity | 4,400 kgcorrect |
|---|
Where this model stands
Power-to-weight ratio: 14.1 kW/t (55 kW / 3.9 t)
Power class: Universal (40–100 hp)
Stronger than 51% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Steyr Kompakt 4075 ecotech have?
The Steyr Kompakt 4075 ecotech delivers 75 hp.
How much does the Steyr Kompakt 4075 ecotech weigh?
The unladen weight is 3,900 kg.
What engine does the Steyr Kompakt 4075 ecotech have?
4 cylinders, 3,400 cm³ displacement, Diesel.
How fast does the Steyr Kompakt 4075 ecotech go?
Top speed is 40 km/h.
How much does the rear linkage of the Steyr Kompakt 4075 ecotech lift?
The rear linkage lifts 4,400 kg.
What are the dimensions of the Steyr Kompakt 4075 ecotech?
4,241 mm × 1,923 mm × 2,494 mm.
When was the Steyr Kompakt 4075 ecotech built?
Production years: 2013.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 18 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
