Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Steyr › Kompakt-Baureihe › 375 Kompakt

Steyr 375 Kompakt

Built: 2004–2008 · Series: Kompakt-Baureihe

More machines from model year 2004

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Kompakt series from Steyr includes the 375 Kompakt. Production: 2004–2008. The engine delivers 76 hp (55.9 kW), has 3 cylinders, with a displacement of 2,931 cm³. Torque is 299 Nm. Rated speed is 2,300 rpm. The machine is 3,440 mm long, 2,300 mm wide and 2,410 mm high. The unladen weight is 2,950 kg. The wheelbase measures 2,065 mm. Ground clearance is 350 mm. Top speed is 30 km/h. The tank holds 75 litres. Transmission: 16V/16R or 32V/16R. The engine is water-cooled. Tyres: front 11.2 R 24 AS, rear 16.9 R 30 AS. The fuel is Diesel/RME. The bore measures 104 mm. The stroke is 115 mm. Maximum torque is reached at 1,400 rpm. Construction: unit construction (no separate frame). The linkage is category I/II. The PTO runs at 430/540 rpm. The Kompakt-Baureihe series covers 4 models. Rated output within it ranges from 59 to 76 hp; the 375 Kompakt sits at the top of that range with 76 hp. Its immediate neighbours are the Kompakt 4075 ecotech below it with 75 hp. Unladen weight within it ranges from 2,850 to 3,900 kg; here the 375 Kompakt sits at the bottom of that range with 2,950 kg. 137 Steyr models across 20 series are on record.

Steyr Kompakt series – compact tractors 360, 370, 375 and Kompakt 4075 ecotech from the CNH era, three- and four-cylinder diesels from 43 to 56 kW, some approved for rapeseed-oil-methyl-ester operation

The Kompakt series emerged after Steyr merged with Case IH and New Holland in 1996 to form today's CNH group; the 360, 370 and 375 Kompakt types and the later Kompakt 4075 ecotech reflect the ongoing development of this smaller Steyr line over several years. The three-digit types order the power class in ascending order, while the 4075 ecotech, with its four-digit designation and ecotech suffix, denotes a later, emissions-optimised generation. Within the CNH group, Steyr shares platforms and components with Case IH and New Holland while remaining a distinctly positioned brand.

Read on 3 more paragraphs

The register lists four versions here with 43.4 to 55.9 kW from three- and four-cylinder diesel engines with 2,931 to 3,400 cm³ displacement. Rated speed is 2,300 rpm, unladen weight ranges from 2,850 to 3,900 kg with lengths from 3,440 to 4,241 mm, widths from 1,923 to 2,300 mm and heights from 2,410 to 2,494 mm; lift capacity at the linkage reaches up to 4,400 kg. Some of the engines are approved to run on diesel or rapeseed oil methyl ester.

As compact all-round tractors, the series targeted smaller farms, municipalities and contractors needing manoeuvrability and a low centre of gravity for yard and grassland work, competing there with comparable compact classes from New Holland and Case IH.

When buying used, check the condition of the front-loader mounting and hydraulic couplings, the tightness of the lift cylinders, wear on the clutch and shuttle gearbox, and on the biodiesel-capable engines the condition of the injection system and fuel filters. Parts run through the CNH dealer network for Steyr, Case IH and New Holland.

Sources: SpecCodex register, model data: Steyr Kompakt-Baureihe, Steyr (CNH Industrial, Hersteller)

Technical data

Engine

FuelDiesel/RMEcorrect
Power76 hp (55.9 kW)correct
Rated speed2,300 rpmcorrect
Torque299 Nmcorrect
Speed at max. torque1,400 rpmcorrect
Cylinders3correct
Displacement2,931 cm³correct
Bore104 mmcorrect
Stroke115 mmcorrect
Coolingwater-cooledcorrect

Dimensions and weights

Length3,440 mmcorrect
Width2,300 mmcorrect
Height2,410 mmcorrect
Wheelbase2,065 mmcorrect
Ground clearance350 mmcorrect
Unladen weight2,950 kgcorrect

Drivetrain and chassis

Drivefour-wheel drivecorrect
Gearbox16V/16R or 32V/16Rcorrect
Front tyres11.2 R 24 AScorrect
Rear tyres16.9 R 30 AScorrect
Top speed30 km/hcorrect

Working data

Fuel tank capacity75 lcorrect

Origin and approval

Constructionunit construction (no separate frame)correct

Other data

Linkage categoryCat I/IIcorrect
PTO speed430/540 rpmcorrect

Where this model stands

Power-to-weight ratio: 18.9 kW/t (56 kW / 3 t)

Power class: Universal (40–100 hp)

Stronger than 52% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Steyr 375 Kompakt have?

The Steyr 375 Kompakt delivers 76 hp.

How much does the Steyr 375 Kompakt weigh?

The unladen weight is 2,950 kg.

What engine does the Steyr 375 Kompakt have?

3 cylinders, 2,931 cm³ displacement, Diesel/RME.

How fast does the Steyr 375 Kompakt go?

Top speed is 30 km/h.

What are the dimensions of the Steyr 375 Kompakt?

3,440 mm × 2,300 mm × 2,410 mm.

When was the Steyr 375 Kompakt built?

Production years: 2004–2008.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 27 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare