Start › Tractors › Steyr › 6125 Profi

Steyr 6125 Profi

Built: 2003–2009 · Series: Profi-Baureihe

More machines from model year 2003

Source: https://www.technikboerse.com/hu/gebraucht/traktor-357/steyr

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Profi series from Steyr includes the 6125 Profi. Production: 2003–2009. The engine delivers 125 hp (92 kW), has 6 cylinders, with a displacement of 6,728 cm³. Torque is 566 Nm. Rated speed is 2,200 rpm. The machine is 4,532 mm long, 1,913 mm wide and 2,920 mm high. The unladen weight is 4,940 kg. The wheelbase measures 2,652 mm. Ground clearance is 355 mm. Top speed is 30 km/h. The tank holds 256 litres. Transmission: 24V/24R or 16V/16R. The engine is water-cooled. Tyres: front 16.9 R 24 AS, rear 18.4 R 38 AS. The fuel is Diesel/RME. Construction: unit construction (no separate frame). The linkage is category II. The PTO runs at 540/540E/1000 rpm. The Profi-Baureihe series covers 5 models. Rated output within it ranges from 101 to 136 hp; the 6125 Profi sits in the upper part of that range with 125 hp. Its immediate neighbours are the 6115 Profi below it with 116 hp and the 6135 Profi above it with 136 hp. Unladen weight within it ranges from 4,940 to 5,350 kg; here the 6125 Profi sits at the bottom of that range with 4,940 kg. 137 Steyr models across 20 series are on record.

Steyr Profi range – four- and six-cylinder tractors from St. Valentin: 4100/4115 Profi and 6115 to 6135 Profi, 74 to 100 kW, diesel or RME

The Steyr Profi range from St. Valentin adds a bigger six-cylinder variant to the Expert range alongside the four-cylinder chassis. The designations 4100 and 4115 Profi carry the 4.5-litre four-cylinder, 6115 to 6135 Profi the bigger six-cylinder; the last digits each give the power class in hp. The engines run on either diesel or the biodiesel RME.

Read on 3 more paragraphs

The register lists here 5 versions with 74.3 to 100.1 kW or 101 to 136 hp from four- to six-cylinders of 4,485 to 6,728 cc, unladen weights from 4,940 to 5,350 kg, lengths from 4,265 to 4,532 mm, widths from 1,873 to 1,913 mm and heights from 2,876 to 2,920 mm, torque from 435 to 612 Nm at a rated speed of 2,200 rpm.

The Profi range covers the mid to upper class of all-round tractors in the Steyr programme, for mixed farms with fodder growing, arable farming and haulage work in Austria, southern Germany and the alpine countries. The parallel four- and six-cylinder layout allows a choice between a more compact build and higher torque.

On the Profi range, what counts is operating hours, the condition of clutch and gearbox, the tightness of the hydraulics, the condition of the four-wheel-drive clutch, and on RME operation the fuel lines and injection system; parts run through the CNH and Steyr network, though parts for the six-cylinder can be harder to source than for the four-cylinder.

Sources: SpecCodex register, model data: Steyr Profi-Baureihe, Steyr (CNH, Hersteller)

Technical data

Engine

Fuel	Diesel/RMEcorrect
Power	125 hp (92 kW)correct
Rated speed	2,200 rpmcorrect
Torque	566 Nmcorrect
Cylinders	6correct
Displacement	6,728 cm³correct
Cooling	water-cooledcorrect

Dimensions and weights

Length	4,532 mmcorrect
Width	1,913 mmcorrect
Height	2,920 mmcorrect
Wheelbase	2,652 mmcorrect
Ground clearance	355 mmcorrect
Unladen weight	4,940 kgcorrect

Drivetrain and chassis

Drive	four-wheel drivecorrect
Gearbox	24V/24R or 16V/16Rcorrect
Front tyres	16.9 R 24 AScorrect
Rear tyres	18.4 R 38 AScorrect
Top speed	30 km/hcorrect

Working data

Fuel tank capacity	256 lcorrect

Origin and approval

Construction	unit construction (no separate frame)correct

Other data

Linkage category	Cat IIcorrect
PTO speed	540/540E/1000 rpmcorrect

Where this model stands

Power-to-weight ratio: 18.6 kW/t (92 kW / 4.9 t)

Power class: Large (100–180 hp)

Stronger than 76% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Steyr 6125 Profi have?

The Steyr 6125 Profi delivers 125 hp.

How much does the Steyr 6125 Profi weigh?

The unladen weight is 4,940 kg.

What engine does the Steyr 6125 Profi have?

6 cylinders, 6,728 cm³ displacement, Diesel/RME.

How fast does the Steyr 6125 Profi go?

Top speed is 30 km/h.

What are the dimensions of the Steyr 6125 Profi?

4,532 mm × 1,913 mm × 2,920 mm.

When was the Steyr 6125 Profi built?

Production years: 2003–2009.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Check the weights in the papers against the figures here — attachments change them.
Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
Shift the gearbox cold and warm — jumps only show up at temperature.
Load the hydraulics and watch for sag.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 23 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →