Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Steyr › 6125 Profi

Steyr 6125 Profi 4WD

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Steyr 6125 Profi 4WD belongs to the Pozostałe modele series. The engine delivers 139.9 hp (94 kW), has 6 cylinders, with a displacement of 6,728.5 cm³. Torque is 566 Nm. Rated speed is 2,200 rpm. The machine is 4,530 mm long, 1,913 mm wide and 2,920 mm high. The unladen weight is 4,940 kg. The wheelbase measures 2,652 mm. Top speed is 50.1 km/h. The tank holds 250.2 litres. Transmission: 24V/24R or 16V/16R. The pump delivers 113.2 l/min. Working pressure is 210 bar. Tyre size: Front 4,9 R28. Rear 18,4 R38. The linkage is category II. The PTO runs at 540/540E/1000 rpm. Rated output across the Steyr range ranges from 13 to 265 hp; the 6125 Profi sits in the middle of that range with 139.9 hp. Its immediate neighbours are the 6135 Profi below it with 136 hp and the 4140 Expert above it with 140 hp. Rated output across the Steyr range ranges from 9.5 to 195 kW; here the 6125 Profi sits in the middle of that range with 94 kW. 137 Steyr models across 20 series are on record.

Steyr – other models: collective page of Austrian tractors outside the named ranges, from Kompakt through Profi to CVT and the large MT models, 22 to 146.2 kW

This page gathers the Steyr tractors the register could not assign to a named range, from small Kompakt models through the Profi range to the stepless CVT large tractors and the large MT models. Steyr builds its tractors at the St. Valentin plant in Upper Austria; the brand has belonged to CNH Industrial since the merger with Case IH in 1996 and has since shared platforms and engines with Case IH. The naming logic is clearly tiered: Kompakt denotes small yard tractors, Profi the mid-range, CVT the large tractors with stepless transmission.

Read on 3 more paragraphs

The register lists here 21 versions with 22 to 146.2 kW from two- to six-cylinder engines of 2,660 to 6,728.5 cm³, unladen weights of 1,800 to 6,650 kg, lengths of 2,630 to 4,790 mm, widths of 1,580 to 2,550 mm and heights of 2,400 to 2,920 mm; torque ranges from 216 to 632 Nm at rated speeds of 2,100 to 2,300 rpm, all with diesel engines.

Steyr positions itself as a premium brand for the Central European and alpine market, with a focus on hill farming and municipal uses where manoeuvrability and four-wheel drive are particularly in demand; main competitors are sister brand Case IH along with Fendt and John Deere.

When buying used, on the CVT models the transmission electronics and cooling matter, on the Kompakt and Profi the clutch, brakes and hydraulic pump; rust on the cab frame and mudguards is common on older models. Parts run through the shared Case IH and Steyr network.

Sources: SpecCodex register, model data: Steyr (weitere Modelle), Steyr Traktoren (manufacturer)

Technical data

Engine

Power139.9 hp (94 kW)correct
Rated speed2,200 rpmcorrect
Torque566 Nmcorrect
Cylinders6correct
Displacement6,728.5 cm³correct
AspirationTurbocharged, intercooledcorrect

Dimensions and weights

Length4,530 mmcorrect
Width1,913 mmcorrect
Height2,920 mmcorrect
Wheelbase2,652 mmcorrect
Unladen weight4,940 kgcorrect

Drivetrain and chassis

Gearbox24V/24R or 16V/16Rcorrect
Gearbox typeSTEYR Power-8correct
Tyre sizeFront 4.9 R28, Rear 18.4 R38correct
Top speed50.1 km/hcorrect

Working data

Pump flow113.2 l/mincorrect
Hydraulic pressure210 barcorrect
Fuel tank capacity250.2 lcorrect

Other data

Cab height2,923 mmcorrect
Linkage categoryCat IIcorrect
PTO speed540/540E/1000 rpmcorrect

Where this model stands

Power-to-weight ratio: 19 kW/t (94 kW / 4.9 t)

Power class: Large (100–180 hp)

Stronger than 77% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Steyr 6125 Profi have?

The Steyr 6125 Profi delivers 140 hp.

How much does the Steyr 6125 Profi weigh?

The unladen weight is 4,940 kg.

What engine does the Steyr 6125 Profi have?

6 cylinders, 6,728 cm³ displacement.

How fast does the Steyr 6125 Profi go?

Top speed is 50.1 km/h.

What are the dimensions of the Steyr 6125 Profi?

4,530 mm × 1,913 mm × 2,920 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 22 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare